Cisco Unified MeetingPlace Release 8.0 -- Configuring SNMP on the Cisco Unified MeetingPlace Application Server

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Requirements for SNMP on the Application Server)
(About SNMP on the Application Server)
 
Line 19: Line 19:
== About SNMP on the Application Server ==
== About SNMP on the Application Server ==
-
* SNMP versions 1 and 2c are supported. SNMP version 3 is ''not'' supported.
+
* SNMP versions 2c and 3 are supported.
* All standard MIB II queries and a set of Cisco Unified MeetingPlace MIB traps are supported.
* All standard MIB II queries and a set of Cisco Unified MeetingPlace MIB traps are supported.
: The MIB II queries include the Cisco Unified MeetingPlace Application Server name, location, contact name, and statistics regarding the network interface.
: The MIB II queries include the Cisco Unified MeetingPlace Application Server name, location, contact name, and statistics regarding the network interface.
Line 120: Line 120:
* ''Alarm and Exception Code Reference for Cisco Unified MeetingPlace'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_technical_reference_list.html  
* ''Alarm and Exception Code Reference for Cisco Unified MeetingPlace'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_technical_reference_list.html  
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Alarm Severity Levels|Alarm Severity Levels]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module  
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Alarm Severity Levels|Alarm Severity Levels]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module  
-
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module  
+
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module
-
 
+
-
 
+
== Requirements for SNMP on the Application Server ==
== Requirements for SNMP on the Application Server ==

Latest revision as of 05:44, 15 April 2013

Main page: Cisco Unified MeetingPlace, Release 8.0

Up one level: Configuration


Note: This module applies only to the Application Server. For information about the other Cisco Unified MeetingPlace servers which support SNMP, see the following:



Topics in this module include:


Contents

About SNMP on the Application Server

  • SNMP versions 2c and 3 are supported.
  • All standard MIB II queries and a set of Cisco Unified MeetingPlace MIB traps are supported.
The MIB II queries include the Cisco Unified MeetingPlace Application Server name, location, contact name, and statistics regarding the network interface.
Each major and minor software notification includes an integer exception code and indicates which software module and server reported the alarm. Normally, each alarm instance generates a separate notification. In some cases, however, one specific incident could trigger multiple types of alarms.


Table: SNMP Traps for the Application Server
Name OID (1) Comment
Trap Types

Major Software Alarm

.1.3.6.1.4.1.7185.3.1.3.0.5

Generated any time Cisco Unified MeetingPlace reports a major software alarm.

Minor Software Alarm

.1.3.6.1.4.1.7185.3.1.3.0.6

Generated any time Cisco Unified MeetingPlace reports a minor hardware alarm.

Trap Message Content

SystemUpTime

1.3.6.1.2.1.1.3.0

Counter for actual Application Server uptime.

Trap Type

-

See Trap Types.

Exception Code

1.3.6.1.4.1.7185.3.1.3.1

Primary code associated with each Cisco Unified MeetingPlace exception condition.

SwSys Unit

1.3.6.1.4.1.7185.3.1.3.2

Unit number of the Cisco Unified MeetingPlace server that reported the exception.


Corresponds to the Unit number used by the Cisco Unified MeetingPlace Gateway System Integrity Manager (Gateway SIM) to identify the server.

Alarm Description

1.3.6.1.4.1.7185.3.1.3.7

One-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.



Footnote 1: OID = Object Identifier

Related Topics

Requirements for SNMP on the Application Server

Import these non-standard MIBs into your network management server or SNMP monitoring package:

  • CISCO-CDP-MIB.my: Cisco Discovery Protocol
  • CISCO-SMI.my: Cisco Enterprise Structure of Management Information
  • CISCO-TC.my: Cisco MIB Textual Conventions
  • CISCO-VTP-MIB.my: Cisco Voice Technology Protocol MIB
  • CISCO-LATITUDE-MIB.my: Cisco Latitude MIB


You can download these MIB files from ftp://ftp.cisco.com/pub/mibs/v2/.

How To Configure SNMP on the Application Server


Adding or Editing SNMP Community Strings

This topic applies only to the Application Server.


Before You Begin

See the Requirements for SNMP on the Application Server.


Restrictions

Do not disable the default community string, which is called meetingplace-public. Doing so will cause the Application Server to give an SNMP "authentication failure" trap every second.


Procedure
  1. Sign in to the Administration Center.
  2. Select Maintenance > SNMP > Community Strings.
  3. Select Add New or select an existing entry.
  4. Enter or change values in the fields.
  5. Select Save.


Related Topics

Displaying or Deleting SNMP Community Strings

This topic applies only to the Application Server.


Restriction

You cannot delete the default community string, which is called meetingplace-public.


Do not disable the default community string, which is called meetingplace-public. Doing so will cause the Application Server to give an SNMP "authentication failure" trap every second.


Procedure
  1. Sign in to the Administration Center.
  2. Select Maintenance > SNMP > Community Strings.
  3. Check the check box next to each community string that you want to delete, or check the topmost check box to select all community strings.
  4. Select Delete Selected.
  5. Select OK.


Related Topics

Adding or Editing SNMP Notification Destinations

This topic applies only to the Application Server.


The system sends a message to the IP address specified in the notification destination whenever a trap or inform condition occurs. A trap reports certain events while an inform condition allows one network management application to send trap information to another.


Procedure
  1. Sign in to the Administration Center.
  2. Select Maintenance > SNMP > Notification Destinations.
  3. Select Add New or select an existing entry.
  4. Enter or change the values in the fields.
  5. Select Save.


Related Topics

Displaying or Deleting SNMP Notification Destinations

This topic applies only to the Application Server.


Procedure
  1. Sign in to the Administration Center.
  2. Select Maintenance > SNMP > Notification Destinations.
  3. Check the check box next to each notification destination that you want to delete, or check the topmost check box to select all notification destinations.
  4. Select Delete Selected.
  5. Select OK.


Related Topics

Rating: 0.0/5 (0 votes cast)

Personal tools