Annekim: /* Table: Field Reference: SIP Configuration Page */ CSCtz67805

2012-05-04T17:15:32Z

Table: Field Reference: SIP Configuration Page: CSCtz67805

← Older revision		Revision as of 17:15, 4 May 2012
Line 230:		Line 230:


-	~~Recommendation~~: Use ~~TCP~~ for the SIP signaling between Cisco Unified MeetingPlace and Cisco Unified Communications Manager~~. This is already the default~~ on ~~the Cisco Unified Communications Manager side~~.	+	Required: Use UDP for the SIP signaling between Cisco Unified MeetingPlace and Cisco Unified Communications Manager on all Hardware Media Server integrations.
-		+

	Default: UDP		Default: UDP
Line 240:		Line 239:

	Footnote 1: FQDN = fully-qualified domain name		Footnote 1: FQDN = fully-qualified domain name
-

	===== Related Topics =====		===== Related Topics =====

MeetingPlace Moderator: 1 revision

2010-07-02T17:20:52Z

1 revision

← Older revision

Revision as of 17:20, 2 July 2010

MeetingPlace Moderator at 21:49, 30 June 2010

2010-06-30T21:49:34Z

New page

'''Up one level:''' [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace|Administration Center Page References for Cisco Unified MeetingPlace]]

In the Cisco Unified MeetingPlace Administration Center, the title of each page appears in the blue bar beneath the "Cisco Unified MeetingPlace System Administration Center" banner.

This section describes the fields and options on each page, presented in alphabetical order by page titles '''R - S'''.

== Remote Server Configuration Page ==

To find this page, select '''System Configuration > Remote Server Configuration'''.

===== Table: Field Reference: Remote Server Configuration Page=====

{| border = 1
|-
!Field
!Description
|-
|colspan="2" rowspan="1"|''' Remote Server Configuration'''
|-
|colspan="2" rowspan="1"|See [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Configuring the Remote Servers|Configuring the Remote Servers]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace|Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace]] module.
|-
|colspan="2" rowspan="1"|''' Reservationless Single Number Access'''
|-
|

Enable RSNA
|

Whether or not the Reservationless Single Number Access (RSNA) feature is enabled.
|-
|

Dial prefix
|

Prefix applied to all RSNA transfer addresses.

Configure this field if you want all Cisco Unified MeetingPlace systems to use a [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Common dial prefix|Common dial prefix]] and the same codec for all call transfers. Consult your telephony administrator to determine the dial prefix required by your routing plan. Cisco IOS-based routing typically requires a 4-character dial prefix, while Cisco Unified Communications Manager-based routing does not require a dial prefix at all.

Leave this field blank in either of these cases:
* You want to use an [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Extended dial prefix|Extended dial prefix]] for each remote server to control the codec used in call transfers.
* (Recommended) You want the system to generate a [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Default dial prefix|Default dial prefix]] for the remote server.

Requirement: If you configure the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace#Dial prefix|Dial prefix]], the RSNA systems must use the same dial prefix.

Restrictions:
* This field supports up to 4 characters.
* Only the legal characters in a SIP user name, as specified in RFC 3261, are supported.

For details, see [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Dial Prefixes|Dial Prefixes]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace|Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace]] module.
|}

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace#Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace|Configuring Reservationless Single Number Access (RSNA) for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Endpoints for Cisco Unified MeetingPlace#How to Configure Auto-Answer Devices|How to Configure Auto-Answer Devices]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Endpoints for Cisco Unified MeetingPlace#Configuring Endpoints for Cisco Unified MeetingPlace|Configuring Endpoints for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (A - C pages)#Table: Field Reference: Add Server Configuration Page and Edit Server Configuration Page|Table: Field Reference: Add Server Configuration Page and Edit Server Configuration Page]]

== Sametime Configuration Page ==

To find this page, select '''System Configuration > Sametime Configuration'''. Use this page to:
* Connect Cisco Unified MeetingPlace to an IBM Lotus Sametime server.
* Download the installer for Cisco Unified MeetingPlace for IBM Lotus Sametime Web Conferencing.

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace#Sametime Server Page|Sametime Server Page]]
* ''Integration Note for Installing and Configuring IBM Lotus Sametime Web Conference with Cisco Unified MeetingPlace'' http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html

== Sametime Server Page ==

To find this page, select '''System Configuration > Sametime Configuration > Sametime Server'''.

===== Table: Navigation Reference: Sametime Server Page =====

{| border = 1
|-
!Field
!Description
|-
|

Hostname
|

Hostname of Sametime server.

Select Change to edit the Sametime server name.
|}

===== Related Topics =====
* ''Integration Note for Installing and Configuring IBM Lotus Sametime Web Conference with Cisco Unified MeetingPlace'' http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html

== SIP Configuration Page ==

To find this page, select '''System Configuration > Call Configuration > SIP Configuration'''.

===== Table: Field Reference: SIP Configuration Page =====

{| border = 1
|-
!Field
!Description
|-
|

Display name
|

Name that appears on Cisco Unified IP Phone screens during calls placed by Cisco Unified MeetingPlace.

Default: Cisco Unified MeetingPlace
|-
|

User ID
|

Enter the same value that is in the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (U - W pages)#Table: Field Reference: Usage Configuration Page|Access phone number 1]] field on the [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (U - W pages)#Usage Configuration Page |Usage Configuration Page]].

The system uses this value in the "From" address for outgoing calls.

Default: 0000
|-
|

Only accept incoming calls from proxies
|

Whether to accept incoming calls from only the SIP proxy servers that are configured on the SIP Configuration Page.

If you select Yes, make sure that the configured SIP proxy servers include all Cisco Unified Communications Manager subscriber nodes that might send calls directly to this Cisco Unified MeetingPlace server.

Default: No
|-
|

SIP domain name
|

Domain name that is used in the "To" address for outgoing calls. If left blank, the Application Server IP address is used instead.

Typically, this field is left blank when the SIP Proxy Server fields are populated with Cisco Unified Communications Manager information.

'''Caution! ''' If you enter a value that does not match the domain used by the SIP proxy servers, Cisco Unified MeetingPlace will fail to dial out.

If outgoing calls fail, configure this field to match the SIP domain used by the SIP Proxy Server or your local Cisco Unified Communications Manager node. In Cisco Unified Communications Manager, the SIP domain is specified under System > Enterprise Parameters in the Organization Top Level Domain field.

'''Note: ''' For details about any field in Cisco Unified Communications Manager, select the field name, or select '''Help > This Page'''.

Example: cisco.com
|-
|

SIP Proxy Server
|

Outgoing SIP calls are directed to these proxies. These proxies are also used to filter incoming calls if the Only accept incoming calls from proxies field is set to Yes.

'''Note: ''' At least one SIP proxy server must be configured to enable dial-out calls.

If multiple proxy servers are configured when placing a call, Cisco Unified MeetingPlace tries each one successively until it finds one that accepts the call. Note, however, that if a proxy does not respond at all (as opposed to rejecting the invite), the call attempt will probably time out before the next proxy is tried.
|-
|

Hostname or IP address
|

Hostname or IP address of the SIP proxy server.

In a Cisco Unified Communications Manager environment, the SIP proxy server should be the IP address of a Cisco Unified Communications Manager node.

Enter the FQDN(1) (or IP address) if the domain of the SIP proxy server differs from the domain that you configured in DNS when you installed Cisco Unified MeetingPlace.
|-
|

Port
|

TCP or UDP port on which the proxy listens for SIP calls.

Default: 5060
|-
|

Transport
|

Whether the port is TCP or UDP.

Recommendation: Use TCP for the SIP signaling between Cisco Unified MeetingPlace and Cisco Unified Communications Manager. This is already the default on the Cisco Unified Communications Manager side.

Default: UDP
|}

Footnote 1: FQDN = fully-qualified domain name

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Call Control for Cisco Unified MeetingPlace#Configuring Call Control for Cisco Unified MeetingPlace|Configuring Call Control for Cisco Unified MeetingPlace]] module

== SMTP Server Configuration Page ==

To find this page, select '''System Configuration > Email Notifications > SMTP Server Configuration'''.

===== Table: Field Reference: SMTP Server Configuration Page =====

{| border = 1
|-
!Field
!Description
|-
|colspan="2" rowspan="1"|''' Primary SMTP Server'''
|-
|

Primary SMTP server
|

Hostname or IP address of the primary SMTP server.

Example: mail1.example.com
|-
|

Primary SMTP server TLS enabled
|

Whether the primary SMTP server is enabled for TLS.

Default: false
|-
|

Primary SMTP server authentication
|

Whether the primary SMTP server requires authentication for Cisco Unified MeetingPlace.

Default: false
|-
|

Primary SMTP server user ID
|

SMTP server user ID to use for authentication for the primary SMTP server.
|-
|

Primary SMTP server password

Primary SMTP server password confirm
|

SMTP server password to use for authentication for the primary SMTP server.
|-
|colspan="2" rowspan="1"|''' Secondary SMTP Server'''
|-
|

Secondary SMTP server
|

Hostname or IP address of the secondary SMTP server.

Example: mail2.example.com
|-
|

Secondary SMTP server TLS enabled
|

Whether the secondary SMTP server is enabled for TLS.

Default: false
|-
|

Secondary SMTP server authentication
|

Whether the secondary SMTP server requires authentication for Cisco Unified MeetingPlace.

Default: false
|-
|

Secondary SMTP server user ID
|

SMTP server user ID to use for authentication for the secondary SMTP server.
|-
|

Secondary SMTP server password

Secondary SMTP server password confirm
|

SMTP server password to use for authentication for the secondary SMTP server.
|}

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Email Notifications for Cisco Unified MeetingPlace#Configuring Email Notifications for Cisco Unified MeetingPlace|Configuring Email Notifications for Cisco Unified MeetingPlace]] module

== System Configuration Page ==

Use this page to perform these tasks:
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Access Phone Numbers and Notification Labels for Cisco Unified MeetingPlace#Configuring Access Phone Numbers and Notification Labels for Cisco Unified MeetingPlace|Configuring Access Phone Numbers and Notification Labels for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Meetings for Cisco Unified MeetingPlace#Configuring Meetings for Cisco Unified MeetingPlace|Configuring Meetings for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Languages for Cisco Unified MeetingPlace#Configuring Languages for Cisco Unified MeetingPlace|Configuring Languages for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Call Control for Cisco Unified MeetingPlace#Configuring Call Control for Cisco Unified MeetingPlace|Configuring Call Control for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Email Notifications for Cisco Unified MeetingPlace#Configuring Email Notifications for Cisco Unified MeetingPlace|Configuring Email Notifications for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Attendant Settings for Cisco Unified MeetingPlace#Configuring Attendant Settings for Cisco Unified MeetingPlace|Configuring Attendant Settings for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring the Auto Attend Feature for Cisco Unified MeetingPlace#Configuring the Auto Attend Feature for Cisco Unified MeetingPlace|Configuring the Auto Attend Feature for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Configuring Direct Inward Dial for Cisco Unified MeetingPlace#Configuring Direct Inward Dial for Cisco Unified MeetingPlace|Configuring Direct Inward Dial for Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Integrating Cisco Unified MeetingPlace with Cisco WebEx#Integrating Cisco Unified MeetingPlace with Cisco WebEx|Integrating Cisco Unified MeetingPlace with Cisco WebEx]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Enabling Cisco Unified MeetingPlace Scheduling from Microsoft Outlook#Enabling Cisco Unified MeetingPlace Scheduling from Microsoft Outlook|Enabling Cisco Unified MeetingPlace Scheduling from Microsoft Outlook]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Securing the Cisco Unified MeetingPlace System#Securing the Cisco Unified MeetingPlace System|Securing the Cisco Unified MeetingPlace System]] module
* ''Integration Note for Installing and Configuring IBM Lotus Sametime Web Conference with Cisco Unified MeetingPlace'' http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_installation_guides_list.html

== System Information Capture Page ==

Running this log generates a very large zip file that you can send to Cisco TAC for troubleshooting. To find this page, select '''Services > Logs > System Information Capture'''.

===== Table: Field Reference: System Information Capture Page =====

{| border = 1
|-
!Field
!Description
|-
|

Start date and time

End date and time
|

Specify the time period during which you want to capture the system information.

Defaults:
* Start date and time: two hours ago
* End date and time: now
|-
|

Your name

Your phone number

Your email address
|

Contact information that Cisco TAC can use to reach you.
|-
|

Event scenario

Observed results

Expected results
|

Information to help Cisco TAC understand and troubleshoot the problem.
|}

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Obtaining and Viewing the System Information Capture (Infocap) Log|Obtaining and Viewing the System Information Capture (Infocap) Log]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module

== System Logs Page ==

To find this page, select '''Services > Logs > View System Logs''', and select '''View Logs'''.

'''Note: ''' These fields appear only when your system has data for the parameters you entered.

===== Table: Field Reference: System Logs Page=====

{| border = 1
|-
!Field
!Description
|-
|

Date
|

The date on which the event occurred.
|-
|

Time
|

The time at which the event occurred.
|-
|

Severity
|

The severity of the event. Can be INFO, WARN, MIN, or MAJ.
|-
|

Ex
|

Exception code.

'''Note: ''' An value of 0 means that no exception code is defined for this event.
|-
|

File
|

The name of the file in which the event occurred.
|-
|

Line
|

The line in the file on which the event occurred.
|-
|

SCodes
|

Context-specific values that are reported along with the exception code.

'''Note: ''' For events with undefined exception codes, these values are used as the description.
|-
|

Description
|

Description of the event.
|}

===== Related Topics =====
* ''Alarm and Exception Code Reference for Cisco Unified MeetingPlace'' at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_technical_reference_list.html
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Viewing the System Log|Viewing the System Log]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module
* [[Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace#View System Logs Page|View System Logs Page]]

== System Status Details Page ==

To find this page, select '''Services > System Status''', and select '''View Status'''.

===== Table: Field Reference: System Status Details Page =====

{| border = 1
|-
!Field
!Description
|-
|colspan="2" rowspan="1"|''' General'''
|-
|

System mode
|

The current loading status of the Cisco Unified MeetingPlace software. One of the following: up, down, shutting down, loading, coming up, and unloaded.
|-
|

Temperature
|

The temperature (in degrees Celsius) as measured on the MSC card inside the cabinet.

'''Note: ''' Until the Cisco Unified MeetingPlace system is up, the temperature reads "Unknown." Once the system is up, the temperature reads correctly.
|-
|

Power supply
|

Displays either "OK" or displays a count of the times the voltage was out of tolerance.
|-
|colspan="2" rowspan="1"|''' Server Information'''
|-
|

Server name
|

The name of the server.
|-
|

Unit
|

Always set to 0 to identify the Application Server.
|-
|

Class
|

The class name.
|-
|

Mailbox
|

The number of the mailbox. This is a hexadecimal number.
|-
|colspan="2" rowspan="1"|''' Mailbox Information'''
|-
|

Mailbox name
|

The name of the mailbox.
|-
|

Unit
|

This is always set to 0.
|-
|

Mailbox
|

The number of the mailbox. This is a hexadecimal number.
|-
|

Messages
|

''For internal use only.''
|-
|colspan="2" rowspan="1"|''' Connection Information'''
|-
|

Conn ID
|

''For internal use only.''
|-
|

Unit
|

This is always set to 0.
|-
|

Creator MB
|

''For internal use only.''
|-
|colspan="2" rowspan="1"|''' Module Information'''
|-
|

Module name
|

The name of the software module.
|-
|

CLS
|

The number of the software module.

See [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Module Numbers|Module Numbers]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module.
|-
|

Status
|

Status of the module. One of the following: up, down, starting, going down, exiting, or gone.
|-
|

PID
|

''For internal use only.''
|-
|

UID
|

User ID used to sign in to Cisco Unified MeetingPlace from a workstation (not from a phone).
|-
|

Exit
|

''For internal use only.''
|-
|colspan="2" rowspan="1"|''' Unit Information'''
|-
|

Unit
|

''For internal use only.''
|-
|

Site
|

''For internal use only.''
|-
|

Status
|

''For internal use only.''
|-
|

Run level
|

''For internal use only.''
|-
|

Unit kind
|

''For internal use only.''
|-
|

Last attach
|

''For internal use only.''
|-
|colspan="2" rowspan="1"|''' CPU Information'''
|-
|

CPU usage
|

''For internal use only.''
|}

===== Related Topics =====
* [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Viewing the Current Status of the System in the Administration Center|Viewing the Current Status of the System in the Administration Center]] in the [[Cisco Unified MeetingPlace Release 8.0 -- Using Alarms and Logs on Cisco Unified MeetingPlace#Using Alarms and Logs on Cisco Unified MeetingPlace|Using Alarms and Logs on Cisco Unified MeetingPlace]] module

[[Category: Reference Information for Cisco Unified MeetingPlace Release 8.0]]

Cisco Unified MeetingPlace Release 8.0 -- Administration Center Page References for Cisco Unified MeetingPlace (R - S pages) - Revision history

Annekim: /* Table: Field Reference: SIP Configuration Page */ CSCtz67805

MeetingPlace Moderator: 1 revision

MeetingPlace Moderator at 21:49, 30 June 2010