Cisco Unified MeetingPlace Express, Release 2.x -- Field Reference: Add SNMP Community String

From DocWiki

Revision as of 23:11, 17 December 2009 by Docwikibot (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Main page: Cisco Unified MeetingPlace Express, Release 2.x

Previous page: Page References



This page is used to add an SNMP community string to the Cisco Unified MeetingPlace Express database.


Table: Fields on the Add SNMP Community String Page
Field Description Value

Community string

The name of the SNMP community string that you are adding.

No spaces allowed

Accept SNMP packets from any host

Select this radio button to allow the SNMP community string to accept SNMP packets from any host.

-

Accept SNMP packets only from these hosts:

Select this radio button to allow the SNMP community string to accept SNMP packets only from hosts that you specify.

-

Host IP address

If you choose the Accept SNMP packets only from these hosts: radio button, enter an IP address and click Insert to allow the SNMP community string to accept SNMP packets from this IP address.

Valid IP address

Host IP addresses

If you choose the Accept SNMP packets only from these hosts: radio button, this field lists all IP addresses from which this SNMP community string can accept SNMP packets. To remove an IP address from this list, highlight it and click Remove.

Valid IP addresses

Access privileges

The access privilege given to this SNMP community string. Access privileges provide security by restricting the ability to alter the Cisco Unified MeetingPlace Express system.

Read only/Read write/Read write notify/Notify only/None



Related Topics

Rating: 0.0/5 (0 votes cast)

Personal tools