Cisco Unified MeetingPlace, Release 7.0 -- Video Endpoint Compatibility

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
m (Bot: Adding {{Template:Required Metadata}})
Line 1: Line 1:
 +
{{Template:Required Metadata}}
'''Main page:''' [[Cisco Unified MeetingPlace, Release 7.0]]
'''Main page:''' [[Cisco Unified MeetingPlace, Release 7.0]]

Revision as of 01:38, 18 December 2009

Main page: Cisco Unified MeetingPlace, Release 7.0


This section provides compatibility information between Cisco Unified MeetingPlace Release 7.0 and various video terminals when using Cisco Unified Communications Manager Release 6.1(2) or higher.


All testing was performed with Cisco Unified MeetingPlace connected to Cisco Unified Communications Manager Release 6.1 or Release 7.0 via SIP trunk. For H.323 testing, the terminal was registered to a H.323 Gatekeeper, which was connected to Cisco Unified Communications Manager through an H.323 trunk. For SIP and SCCP, the terminal was registered directly to Cisco Unified Communications Manager.


Notes:

  • Cisco Unified Communications Manager Release 6.1(2) or higher is required for all video installations except where only Cisco Unified Video Advantage is used, in which case Cisco Unified Communications Manager Release 6.0(3) is adequate.
  • Endpoints with the following test results are likely to drop calls when transferring to a breakout session, initiating a #31 dial-out call, or exiting the meeting with #9:
    • Dial in-fail
    • Dial out-fail
    • Direct to meeting-OK or "-"
These video endpoints typically do not correctly support the required media transfer mechanism.
  • Transferring a Cisco Unified MeetingPlace call from a Cisco-brand phone to a third-party SIP video terminal is likely to result in an audio-only connection. This is due to differences in the way Cisco and third-party terminals negotiate transport of telephony events. The differences cause Cisco Unified Communications Manager to insert a media termination point (MTP) in the call. Unless a hardware MTP resource is available, this insertion will block the video stream.



Contents

Video Endpoint Compatibility Test Results for Release 7.0.2

Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 7.0.2
Manufacturer/Brand Model/Series Protocol Dial In Dial Out Direct to Meeting 4CIF Version Tested Notes

Cisco

Cisco Unified Personal Communicator

SIP

OK

OK

OK

N

-

-

Cisco

Cisco Unified Video Advantage

SCCP

OK

OK

OK

N

-

-

Cisco

7985

SCCP

OK

OK

OK

Y

-

-

Cisco

Telepresence

SIP

No video

No video

No video

-

-

-

Tandberg

MXP Series except 150 MXP

H.323

OK

No video

OK

Y

F7

Tested1500, 6000, 95, 3000, 1700, 990.

Tandberg

MXP Series except 150 MXP

SIP

OK

OK

OK

Y

F7

-

Tandberg

150 MXP

H.323

-

-

-

-

L4.2

-

Tandberg

150 MXP

SIP

Fail

OK

OK

-

L4.2

Unable to recognize DTMF tones.

Tandberg

1000

H.323

OK

No video

OK

-

B 7.4, E 5.3, F7.2

H.263 only.

Tandberg

6000

H.323

OK

No video

OK

Y

E5.2, B10.3

H.263 only for TBG6000B.

Polycom

VSX Series

H.323

OK

OK

OK

Y

8.5.3, 8.7.1

Tested 3000A, 5000, 7000 NTSC, 8000.

Polycom

VSX Series

SIP

One-way video

One-way video

-

Y

8.5.3, 8.7.1

-

Polycom

Via Video (PVX)

H.323

OK

OK

OK

-

8.0.2

Large delay sending video by PVX.

Polycom

Via Video (PVX)

SIP

OK

OK

OK

-

8.0.2

-

Polycom

VS 512

H.323

Fail

Fail

-

-

7.5.4

-

Polycom

FX

H.323

Fail

Fail

-

-

6.0.5

-

Polycom

HDX 9002

H.323

OK

OK

OK

Y

2.0.3

-

Polycom

HDX 9002

SIP

OK

OK

OK

Y

2.0.3

Prompts are clipped.

Aethra

AVC 8400

H.323

OK

OK

OK

Y

6.0.30

Should be forced to prefer H263x4CIF in a 4CIF mode. Otherwise, it opens CIF.

Aethra

THESEUS

SIP

No video

Fail

-

-

V6.0.49

-

Aethra

Vega X5

H.323

OK

OK

OK

Y

10.2.24

Should be forced to prefer H263x4CIF in a 4CIF mode. Otherwise, it opens CIF.

Aethra

Vega X5

SIP

No video

Fail

-

-

-

-

Aethra

Vega X7

H.323

OK

OK

OK

Y

V12

Should be forced to prefer H263x4CIF in a 4CIF mode. Otherwise, it opens CIF.

Aethra

Vega X7

SIP

OK

Fail

-

-

-

-

Aethra

Vega X3

H.323

OK

OK

OK

Y

V10.7.11

Should be forced to prefer H263x4CIF in a 4CIF mode. Otherwise, it opens CIF.

Aethra

Vega X3

SIP

No video

Fail

-

-

-

-

Sony

PCS-1

H.323

OK

One-way video

-

-

3.31

-

Sony

PCS-1

SIP

One-way video

One-way video

-

-

-

-

Sony

PCS G-50

H.323

OK

One-way video

-

-

2.41

-

Sony

PCS TL-50

H.323

OK

One-way video

-

-

2.31

-

Sony

TL-30

H.323

OK

One-way video

-

-

1.24

-

Sony

XG80

H.323

Fail

Fail

-

-

2

No DTMF recognition.

Sony

XG80

SIP

OK

One-way video

-

-

-

-

Sony

G-70

H.323

OK

One-way video

-

Y

2.41

-

France Telecom

eConf

H.323

OK

OK

OK

-

5.0.34

-

France Telecom

eConf

SIP

One-way video & audio

One-way video & audio

-

-

-

RFC 2833 should be used for DTMF.

Counterpath

eyeBeam

SIP

OK

OK

OK

-

1.5

-

LifeSize

Room

H.323

Fail

Fail

-

-

3.5.3(11)

-

Lifesize

Room

SIP

Fail

No video

-

Y

-

No DTMF recognition.



Related Topics


Video Endpoint Compatibility Test Results for Release 7.0.1

Table: Table 3 Video Endpoints Compatible with Cisco Unified MeetingPlace Release 7.0.1
Brand/Manufacturer Model/Series Protocol Dial In Dial Out Direct to Meeting Version Tested

Cisco

Cisco Unified Personal Communicator

SIP

OK

OK

OK

-

Cisco

Cisco Unified Video Advantage

SCCP

OK

OK

OK

-

Cisco

7985

SCCP

OK

OK

OK

-

Cisco

Telepresence

SIP

no video

no video

no video

-

Tandberg

MXP Series except MXP 150

H.323

OK

no video

OK

F7.0 Beta1

Tandberg

MXP Series except MXP 1500

H.323

no video

no video

OK

F6.12

Tandberg

MXP 1500

H.323

no video

no video

no video

F6.1

Tandberg

550

SCCP

OK

OK

OK

-3

Tandberg

1000

SCCP

OK

OK

OK

I2.1 NTSC

Tandberg

1000b

H.323

OK

no video

OK

B 7.4

Tandberg

1000E

H.323

no video

no video

no video

E 5.34

Tandberg

6000

H.323

OK

no video

OK

E5.2, B10.3

Polycom

VSX Series

H.323

OK

OK

OK

8.5.3

Polycom

VSX Series

SIP

fail

fail

-

8.5.3

Polycom

VSX Series

SCCP

no video

no video

-

HF8.6.2a

Polycom

Viewstation

H.323

fail

fail

OK

7.2

Polycom

Via Video (PVX)

H.323

OK

OK

OK

8.0.2

Polycom

Via Video (PVX)

SIP

OK

OK

OK

8.0.2

Polycom

VS 512

H.323

fail

fail

-

7.5.4

Polycom

FX

H.323

fail

fail

-

6.0.5

Polycom

HDX 9002

H.323

OK

OK

OK

Beta 2.0.0

Polycom

HDX 9002

SIP

OK

OK

OK

Beta 2.0.0

Aethra

AVC 8400

H.323

OK

OK

OK

6.0.30

Aethra

X5

H.323

OK

OK

OK

10.2.24

Aethra

X7

H.323

fail

fail

-

V11.1.2

Aethra

Vega Star Silver

H.323

OK

OK

OK

6.0.30

Sony

PCS-1

H.323

OK

fail

-

3.31

Sony

PCS G-50

H.323

OK

fail

-

2.41

Sony

PCS TL-50

H.323

OK

fail

OK

2.31

Sony

TL-30

H.323

OK

fail

-

1.24

Sony

HG90

H.323

fail

fail

-

2.20.00

Sony

G-70

H.323

OK

fail

-

2.41

France Telecom

eConf

H.323

OK

OK

OK

4.1.285

Counterpath

eyeBeam

SIP

fail

fail

-

1.5.126

LifeSize

Room

H.323

fail

fail

-

3.0.0(23)

LifeSize

Room

H.323

fail

fail

OK

3.0.7(2)

LifeSize

Room

SIP

fail

fail

-

3.0.0(23)

Innomedia

MTA 5531

SIP

fail

fail

-

-3

Leadtek

BVP 8882

SIP

fail

fail

-

-3

Footnote 1: Tested MXP1700 and MXP1000 with this version; RCDO must be disabled in the terminal; low resolution video with Cisco Unified Communications Manager Release 6.1, fixed in Cisco Unified Communications Manager Release 7.0.

Footnote 2: RCDO must be disabled in the terminal; low resolution video with Cisco Unified Communications Manager Release 6.1, fixed in Cisco Unified Communications Manager Release 7.0.

Footnote 3: Not recorded.

Footnote 4: One-way video.

Footnote 5: Poor audio quality with G.722.

Footnote 6: No DTMF.



Related Topics


Terminology Used in Video Endpoint Compatibility Test Results

The following table describes the terminology used in Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 7.0.2 and Table: Video Endpoints Compatible with Cisco Unified MeetingPlace Release 7.0.1, which provide compatibility test results.


Terminology Description
Test

Dial In

Tested dialing in to Cisco Unified MeetingPlace.

Dial Out

Tested dialing out from Cisco Unified MeetingPlace by using a web browser command or by using the TUI command #31.

Direct to Meeting

Tested dialing out from Cisco Unified MeetingPlace using the scheduled "direct to meeting" mode. The process was to configure a video terminal profile for outdial to terminal, tell the video terminal to skip the meeting entry prompts on outdial, and then invite the terminal to the meeting.

4CIF

Tested whether the terminal worked when tested with 4CIF using H.263.

Result

OK

The terminal was able to enter a meeting using video.

No video

The terminal was able to enter a meeting, but without video or (in Release 7.0.1 results only) with one-way video.

Fail

The terminal was not able to enter a meeting. The failure may have been at initial connection or at meeting entry.

"-"

The terminal was not tested in this mode.



Video Format Support

Table: Supported Video Formats lists the supported video formats for various combinations of the global video mode and the codec used by the video terminal.


Notes:

  • If Cisco Unified Communications Manager causes the connection rate to be lower than the maximum for your global video mode setting (384 kbps for standard rate, 2 Mbps for high rate), then the resolution or frames per second sent by Cisco Unified MeetingPlace may be reduced.
  • For a Release 7.0.2 system:
    • H.263 and H.261 are offered only by defining a video terminal profile.
    • Otherwise, only H.264 will be offered.
  • For a Release 7.0.1 system:
    • 4CIF is not supported.
    • All three codecs can be negotiated in high rate without a video terminal profile.
    • H.263 and H.264 can be negotiated in standard rate without a video terminal profile.


Table: Supported Video Formats
Global Video Mode Codec Video Format Frames per Second
High rate (2 Mbps maximum)

H.264

CIF, QCIF

30

H.263

4CIF

15

H.263

CIF, QCIF

30

H.261

CIF, QCIF

30

Standard rate (384 kbps maximum)

H.264

CIF

15

H.264

QCIF

30

H.263

CIF, QCIF

30

Rating: 5.0/5 (1 vote cast)

Personal tools