Cisco Unified MeetingPlace, Release 7.0 -- Configuring the Maximum Call Duration in Cisco Unified Communications Manager

From DocWiki

Revision as of 00:41, 18 December 2009 by Docwikibot (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Integration




The maximum length of a meeting depends on three values, the lowest of which is enforced:

  • "Maximum meeting length (minutes)" field on the Meeting Configuration Page.
  • "Maximum meeting length (minutes)" field in the user profile of the meeting owner.
  • "Maximum Call Duration Timer" service parameter in Cisco Unified Communications Manager.


This task describes how to view and (if necessary) configure the service parameter in Cisco Unified Communications Manager.


Before You Begin
  • This task applies only in Cisco Unified Communications Manager environments.
  • You perform this task in the Cisco Unified Communications Manager Administration pages. Because the pages and menus vary by release, you should check the Cisco Unified Communications Manager online help for step-by-step instructions for your specific release.


Procedure
  1. Go to http://<ccm-server>/, where <ccm-server> is the fully-qualified domain name or IP address of the Cisco Unified Communications Manager server.
  2. Log in with your Cisco Unified Communications Manager administrator username and password.
  3. Click System > Service Parameters.
  4. Select the server.
  5. Select the Cisco CallManager service.
  6. Find the Maximum Call Duration Timer field.
  7. Modify this field only if you require meetings to last longer than the previously configured value.
    • A value of 0 disables the timer, which is recommended for continuous meetings.
    • For descriptions of this or any other field on the page, click the field name.
  8. Click Save if you modified any parameters.


Related Topics

Rating: 5.0/5 (1 vote cast)

Personal tools