Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m
m (reverted to previous content as per request from DE)
Line 9: Line 9:
External meetings are held on an external Web Server so that users can access their meetings from the Internet. Rather than have all of your users log in to a particular external Web Server, configure automatic redirection of all external meetings from your internal Web Servers to a designated external Web Server.
External meetings are held on an external Web Server so that users can access their meetings from the Internet. Rather than have all of your users log in to a particular external Web Server, configure automatic redirection of all external meetings from your internal Web Servers to a designated external Web Server.
-
 
-
==Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)==
 
'''Before You Begin'''
'''Before You Begin'''
-
*Complete [[Cisco Unified MeetingPlace, Release 7.0 -- Prerequisites for Configuring SMA-2S|Prerequisites for Configuring SMA-2S]].  
+
Complete [[Cisco Unified MeetingPlace, Release 7.0 -- Prerequisites for Configuring SMA-2S|Prerequisites for Configuring SMA-2S]].  
-
* This task applies to the following Cisco Unified MeetingPlace releases:
+
-
** Release 7.0
+
-
** Release 7.1
+
Line 30: Line 25:
## Enter the fully qualified domain name (FQDN) of your external Web Server in the Hostname field, that is, ''hostname.domain.com''. If your Web Server is not in a Domain Name Server (DNS), enter the IP address instead.  
## Enter the fully qualified domain name (FQDN) of your external Web Server in the Hostname field, that is, ''hostname.domain.com''. If your Web Server is not in a Domain Name Server (DNS), enter the IP address instead.  
##* You must be able to resolve this hostname from the internal Web Server.
##* You must be able to resolve this hostname from the internal Web Server.
 +
##* If you are using SSL, make sure that the hostname on the SSL certificate resolves to the external Web Server IP address.
 +
##* If you are using SSL and a segmented DNS, make sure that the DNS name and the SSL certificate name differ.
## Click '''Submit''' to add this Web Server to the database.  
## Click '''Submit''' to add this Web Server to the database.  
##: This server now appears as part of your list of Web Servers in the "View" section of the page.
##: This server now appears as part of your list of Web Servers in the "View" section of the page.
Line 46: Line 43:
Proceed to [[Cisco Unified MeetingPlace, Release 7.0 -- How to Test Your SMA-2S Configuration#|How to Test Your SMA-2S Configuration]].
Proceed to [[Cisco Unified MeetingPlace, Release 7.0 -- How to Test Your SMA-2S Configuration#|How to Test Your SMA-2S Configuration]].
-
==Enabling SMA on a Deployment with One Internal and One External Web Server (with SSL)==
 
-
 
-
'''Before You Begin'''
 
-
 
-
This task applies to the following Cisco Unified MeetingPlace releases:
 
-
* Release 7.0
 
-
* Release 7.1
 
-
 
-
 
-
'''Procedure'''
 
-
 
-
# Enable SMA on an internal web server Admin page. 
 
-
#: Complete the steps in [[Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings#Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)|Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)]].
 
-
#: '''Note:''' Since you are using SSL, make sure that the hostname on the SSL certificate resolves to the external Web Server IP address. If you are using SSL and a segmented DNS, make sure that the DNS name and the SSL certificate name differ.
 
-
# Toggle SSL to ON on the internal Cisco Unified MeetingPlace web server.
 
-
#: Complete the steps in  [[Cisco Unified MeetingPlace, Release 7.1 -- How to Upgrade the Web Server#Toggling On SSL on the Internal Web Server|Toggling On SSL on the Internal Web Server]].
 
-
# Toggle SSL to ON on the external Cisco Unified MeetingPlace web server.
 
-
#: Complete the steps in [[Cisco Unified MeetingPlace, Release 7.1 -- How to Upgrade the Web Server#Toggling On SSL on the External Web Server|Toggling On SSL on the External Web Server]].
 
-
 
-
==Enabling SMA on a Deployment with Multiple Internal and External Web Servers (no SSL) ==
 
-
 
-
 
-
'''Before You Begin'''
 
-
 
-
*This task applies to load balancing deployments without SSL configuration.
 
-
*This task applies to the following Cisco Unified MeetingPlace releases:
 
-
** Release 7.0
 
-
** Release 7.1
 
-
 
-
 
-
'''Procedure'''
 
-
 
-
# Enable SMA from any internal web server that is part of your load balancing configuration.
 
-
#: Complete the steps in [[Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings#Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)|Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)]].
 
-
 
-
==Enabling SMA on a Deployment with Multiple Internal and External Web Servers (with SSL) ==
 
-
 
-
 
-
'''Before You Begin'''
 
-
 
-
*This task applies to load balancing deployments with SSL configured.
 
-
*This task applies to the following Cisco Unified MeetingPlace releases:
 
-
** Release 7.0
 
-
** Release 7.1
 
-
 
-
 
-
'''Procedure'''
 
-
 
-
# Enable SMA from any internal web server that is part of your load balancing configuration.
 
-
#: Complete the steps in [[Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings#Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)|Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)]].
 
-
# Toggle SSL to ON on all internal Cisco Unified MeetingPlace web servers.
 
-
# Reboot all internal web servers.
 
-
# Toggle SSL to ON on all external Cisco Unified MeetingPlace web servers.
 
-
# Reboot all external web servers.
 
-
 
-
 
   
   
[[Category: Configuring Web Conferencing for Cisco Unified MeetingPlace, Release 7.0]]
[[Category: Configuring Web Conferencing for Cisco Unified MeetingPlace, Release 7.0]]
-
 
-
[[Category: Upgrading Cisco Unified MeetingPlace, Release 7.1]]
 

Revision as of 19:00, 21 July 2011

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Configuration



External meetings are held on an external Web Server so that users can access their meetings from the Internet. Rather than have all of your users log in to a particular external Web Server, configure automatic redirection of all external meetings from your internal Web Servers to a designated external Web Server.


Before You Begin

Complete Prerequisites for Configuring SMA-2S.


Procedure

  1. Sign in to the end-user web interface on the internal Web Server.
  2. Click Admin.
  3. Configure the external web server.
    1. Click Web Server.
    2. From a blank Web Server Name field, enter the name of a new Web Server to represent your designated external Web Server.
    3. Enter the fully qualified domain name (FQDN) of your external Web Server in the Hostname field, that is, hostname.domain.com. If your Web Server is not in a Domain Name Server (DNS), enter the IP address instead.
      • You must be able to resolve this hostname from the internal Web Server.
      • If you are using SSL, make sure that the hostname on the SSL certificate resolves to the external Web Server IP address.
      • If you are using SSL and a segmented DNS, make sure that the DNS name and the SSL certificate name differ.
    4. Click Submit to add this Web Server to the database.
      This server now appears as part of your list of Web Servers in the "View" section of the page.
  4. Assign your primary external web server to the DMZ Web Server field on the Admin page.
    1. Return to the main Administration page and click Site.
    2. Click the Site Name that represents your cluster of internal Web Servers.
      Note: Site Name should have a default value equal to the NetBIO name of the first Web Server you installed in this cluster.
    3. Select the external Web Server you just added for DMZ Web Server.
      This configures the internal Web Servers in this cluster to point to this external Web Server in the case of external meetings.
    4. Click Submit.
      Tip: The external cluster does not require any additional SQL Server database configurations.


What to Do Next

Proceed to How to Test Your SMA-2S Configuration.

Rating: 0.0/5 (0 votes cast)

Personal tools