Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (Enabling SMA on a Deployment with One Internal and One External Web Server (with SSL))
m (Enabling SMA on a Deployment with Multiple Internal and External Web Servers (no SSL))
Line 75: Line 75:
'''Before You Begin'''
'''Before You Begin'''
-
This task is for load balancing deployments without SSL configuration.
+
*This task applies to load balancing deployments without SSL configuration.
 +
*This task applies to the following Cisco Unified MeetingPlace releases:
 +
** Release 7.0
 +
** Release 7.1
Line 82: Line 85:
# Enable SMA from any internal web server that is part of your load balancing configuration.  
# Enable SMA from any internal web server that is part of your load balancing configuration.  
#: Complete the steps in [[Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings#Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)|Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)]].
#: Complete the steps in [[Cisco Unified MeetingPlace, Release 7.0 -- Configuring Redirection of External Meetings#Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)|Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)]].
-
 
-
 
==Enabling SMA on a Deployment with Multiple Internal and External Web Servers (with SSL) ==
==Enabling SMA on a Deployment with Multiple Internal and External Web Servers (with SSL) ==

Revision as of 23:04, 20 July 2011

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Configuration


This content applies to the following releases:

  • Release 7.0
  • Release 7.1


External meetings are held on an external Web Server so that users can access their meetings from the Internet. Rather than have all of your users log in to a particular external Web Server, configure automatic redirection of all external meetings from your internal Web Servers to a designated external Web Server.


Contents

Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)

Before You Begin


Procedure

  1. Sign in to the end-user web interface on the internal Web Server.
  2. Click Admin.
  3. Configure the external web server.
    1. Click Web Server.
    2. From a blank Web Server Name field, enter the name of a new Web Server to represent your designated external Web Server.
    3. Enter the fully qualified domain name (FQDN) of your external Web Server in the Hostname field, that is, hostname.domain.com. If your Web Server is not in a Domain Name Server (DNS), enter the IP address instead.
      • You must be able to resolve this hostname from the internal Web Server.
    4. Click Submit to add this Web Server to the database.
      This server now appears as part of your list of Web Servers in the "View" section of the page.
  4. Assign your primary external web server to the DMZ Web Server field on the Admin page.
    1. Return to the main Administration page and click Site.
    2. Click the Site Name that represents your cluster of internal Web Servers.
      Note: Site Name should have a default value equal to the NetBIO name of the first Web Server you installed in this cluster.
    3. Select the external Web Server you just added for DMZ Web Server.
      This configures the internal Web Servers in this cluster to point to this external Web Server in the case of external meetings.
    4. Click Submit.
      Tip: The external cluster does not require any additional SQL Server database configurations.


What to Do Next

Proceed to How to Test Your SMA-2S Configuration.

Enabling SMA on a Deployment with One Internal and One External Web Server (with SSL)

Before You Begin

This task applies to the following Cisco Unified MeetingPlace releases:

  • Release 7.0
  • Release 7.1


Procedure

  1. Enable SMA on an internal web server Admin page.
    Complete the steps in Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL).
    Note: Since you are using SSL, make sure that the hostname on the SSL certificate resolves to the external Web Server IP address. If you are using SSL and a segmented DNS, make sure that the DNS name and the SSL certificate name differ.
  2. Toggle SSL to ON on the internal Cisco Unified MeetingPlace web server.
    Complete the steps in Toggling On SSL on the Internal Web Server.
  3. Toggle SSL to ON on the external Cisco Unified MeetingPlace web server.
    Complete the steps in Toggling On SSL on the External Web Server.

Enabling SMA on a Deployment with Multiple Internal and External Web Servers (no SSL)

Before You Begin

  • This task applies to load balancing deployments without SSL configuration.
  • This task applies to the following Cisco Unified MeetingPlace releases:
    • Release 7.0
    • Release 7.1


Procedure

  1. Enable SMA from any internal web server that is part of your load balancing configuration.
    Complete the steps in Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL).

Enabling SMA on a Deployment with Multiple Internal and External Web Servers (with SSL)

Before You Begin

This task is for load balancing deployments with SSL configured.


Procedure

  1. Enable SMA from any internal web server that is part of your load balancing configuration.
    Complete the steps in Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL).
  2. Toggle SSL to ON on all internal Cisco Unified MeetingPlace web servers.
  3. Reboot all internal web servers.
  4. Toggle SSL to ON on all external Cisco Unified MeetingPlace web servers.
  5. Reboot all external web servers.

Rating: 0.0/5 (0 votes cast)

Personal tools