Cisco Unified MeetingPlace, Release 7.0 -- Configuring Parameters that Affect Sound and Video Quality

From DocWiki

Revision as of 01:20, 18 December 2009 by Docwikibot (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Reference Information



Before You Begin

You must enable Quality of Service (QoS) in your network to minimize IP packet loss, packet delay, and delay variation (or jitter) of voice packets. In particular, you must enable Differentiated Services Code Point (DSCP), also called DiffServ, which is the QoS mechanism supported by Cisco Unified MeetingPlace.


Note: The Cisco Unified MeetingPlace default DiffServ settings conform to the recommendations in the Cisco Unified Communications Solution Reference Network Design (SRND). If your network already conforms to these recommendations, then no QoS configuration is required.


Procedure
  1. Log in to the Administration Center.
  2. Click System Configuration > Call Configuration > Media Parameters.
  3. Configure the fields on the Media Parameters Page.
  4. Click Save.


Related Topics

Rating: 0.0/5 (0 votes cast)

Personal tools