Cisco Unified MeetingPlace, Release 6.x -- Requirements for Cisco Unified MeetingPlace Web Conferencing Release 6.0

From DocWiki

Revision as of 22:38, 16 December 2008 by Jmcmulle (Talk | contribs)
Jump to: navigation, search

Cisco Unified MeetingPlace, Release 6.x > System Requirements




For international, non-US English deployments: See the Cisco Unified MeetingPlace SMTP E-Mail Gateway requirement in the Integration Requirements: Cisco Unified MeetingPlace SMTP E-Mail Gateway.


Contents

Hardware Requirements


Web Server Requirements

The Cisco Unified MeetingPlace Web Conferencing system is a software product loaded onto a hardware server. New installations of Web Conferencing require a Cisco MCS that is dedicated to Cisco Unified MeetingPlace applications.


For information about the Cisco MCS, go to http://www.cisco.com/en/US/partner/products/hw/voiceapp/ps378/index.html. (You need your Cisco.com username and password to access this page.)


Table: Supported Cisco 7800 Series MCS Models lists supported Cisco 7800 Series Media Convergence Server models. The Cisco MCS server must have a DVD-ROM drive, keyboard, mouse, and monitor.


Exact equivalent third-party servers are also supported. For information, go to http://www.cisco.com/go/swonly.


Table: Supported Cisco 7800 Series MCS Models
System Voice Conferencing Capacity Web Conferencing Capacity
  • Cisco MCS-7835-H2-RC1
  • Cisco MCS-7835-I2-RC1
  • Cisco MCS-7835-H1-RC1
  • Cisco MCS-7835-I1-RC1
  • Cisco MCS-7835-H2-RC2
  • Cisco MCS-7835-I2-RC2
  • Cisco MCS-7835-H1-RC2
  • Cisco MCS-7835-I1-RC2

Up to 480 voice user licenses per server.

Up to 50 web-conferencing user licenses per server.

  • Cisco MCS-7845-H2-RC1
  • Cisco MCS-7845-I2-RC1
  • Cisco MCS-7845-H1-RC1
  • Cisco MCS-7845-I1-RC1
  • Cisco MCS-7845-H2-RC2
  • Cisco MCS-7845-I2-RC2
  • Cisco MCS-7845-H1-RC2
  • Cisco MCS-7845-I1-RC2

Up to 1,152 voice user licenses per server.

Up to 500 web-conferencing user licenses per server.


If you have more than 50 web-conferencing user licenses, move your Cisco Unified MeetingPlace applications (for example, Cisco Unified MeetingPlace for Outlook, Cisco Unified MeetingPlace SMTP E-Mail Gateway) to a MCS 7845 that is dedicated to web conferencing.

Note: Add a dedicated Cisco MCS 7845 for each additional 500 web-conferencing user licenses.

Note: If you host Cisco Unified MeetingPlace Web Conferencing and Cisco Unified MeetingPlace for Outlook on the same server, the system capacity for supporting web-conferencing user licenses is reduced by 20 percent. For example, if your system supports 500 web users and you add Cisco Unified MeetingPlace for Outlook on the same server, the system capacity for supporting web-conferencing user licenses is reduced by 20 percent, from 500 to 400.



Additional Requirements

Web Server Capacities

The number of ports that a Cisco Unified MeetingPlace Web Conferencing server can support depends on the following:

  • The type of hardware.
  • Whether SSL is used. (Cisco Unified MeetingPlace Web Conferencing systems configured with SSL support 30 percent fewer ports than systems that do not use SSL.)
  • The colocation of other Cisco Unified MeetingPlace components on the hardware. Cisco Unified MeetingPlace Web Conferencing servers collocated with either Cisco Unified MeetingPlace for Microsoft Outlook or Cisco Unified MeetingPlace for IBM Lotus Notes support 20 percent fewer ports than systems without either of those components collocated.

The following table lists the number of Web Conferencing ports supported per server based on the most common configurations.


Table: Web Conferencing Ports Supported Per Server Type
Number of Web Conferencing Ports Supported Per Server 7835 H1/I1 7835 H2/I2 7845 H1/I1 7845 H2/I2

MP Web:

  • without SSL
  • with or without Cisco Unified MeetingPlace SMTP E-Mail Gateway
  • collocated with or without Cisco Unified MeetingPlace video

100

200

250

500

MP Web:

  • with SSL
  • with or without Cisco Unified MeetingPlace SMTP E-Mail Gateway
  • collocated with or without Cisco Unified MeetingPlace video

70

140

175

350

MP Web:

  • without SSL
  • collocated with either Cisco Unified MeetingPlace for Microsoft Outlook or Cisco Unified MeetingPlace for IBM Lotus Notes
  • collocated with or without Cisco Unified MeetingPlace video

80

160

200

400

MP Web:

  • with SSL
  • collocated with either Cisco Unified MeetingPlace for Microsoft Outlook or Cisco Unified MeetingPlace for IBM Lotus Notes
  • collocated with or without Cisco Unified MeetingPlace video

50

110

140

280




Enter the values from the table aboive into the Max Concurrent Web Conference Users field on the Web Server page of the Cisco Unified MeetingPlace Administration Center.

Note that if you have a Cisco Unified MeetingPlace web cluster configuration (two or more web servers operating in cluster mode), you must enter the same value for each web server. The value that you enter is the sum of the ports supported by the cluster configuration. For example, if you have two 7845H2 servers with SSL enabled and Cisco Unified MeetingPlace for Microsoft Outlook is configured on one web server, then use the value for that configuration from the table above and multiply it by two. (You do not need to factor in that the second web server does not host Cisco Unified MeetingPlace for Microsoft Outlook.) In this example, the value for that specific configuration is 280 so you should enter 560 for the Max Concurrent Web Conference Users parameter. Enter this value for each server in your cluster.


NOTE: There is no table available showing the number of Web Conferencing ports supported for deployments involving other Cisco Unified MeetingPlace components such as Cisco Unified MeetingPlace Directory Services or the Cisco Unified MeetingPlace H.323/SIP IP Gateway. We highly recommend that you use a dedicated Cisco MCS server for these other integrations if you cannot reduce the values documented above to accommodate the colocation of these other components. Note that the Cisco Unified MeetingPlace H.323/SIP IP Gateway and Cisco Unified MeetingPlace Directory Services loads are directly connected to the size of your deployment, including the volume of voice conferencing and the number of Cisco Unified MeetingPlace end-user profiles.


System Capacity

The Cisco Unified MeetingPlace 8112 Audio Server can scale to 960 IP, 1152 T1-CAS, 960 E1-PRI, or 768 T1-PRI concurrent users, whereas the Cisco Unified MeetingPlace 8106 Audio Server can scale to half the size of the 8112 platform. A single meeting can support up to 550 participants. Cisco Unified MeetingPlace 6.0 Web Conferencing can support up to 1000 concurrent Web conferencing users with a cluster of two Cisco MCSs. Each server in a cluster can support up to 500 concurrent Web conferencing users and 100 concurrent meetings, and the maximum meeting size is 1000 participants (refer to the Cisco Unified MeetingPlace Web Conferencing data sheet for details). Participants can join at a maximum rate of 4 connections per second per cluster.

When voice and web conferencing are deployed together, the maximum simultaneous use capacity is 1000 combined voice and Web connections per system, see system scalability table below.

Table: System Scalability for Cisco Unified MeetingPlace 8112 Audio Server

Voice connections

1000

800

500

200

0

Web connections

0

200

500

800

1000

Total

1000

1000

1000

1000

1000

Cisco Unified MeetingPlace Video Integration supports up to 72 videoconferencing participants per chassis from 128 kbps to 2 Mbps per participant on the Cisco Unified Videoconferencing 3500 Series MCUs. Multiple chassis can be deployed in a single cluster, with up to 240 video participants per cluster.



Audio Server Requirements

Cisco Unified MeetingPlace Web Conferencing requires connection to a Cisco Unified MeetingPlace Audio Server system for full functionality. The Audio Server software component must reside on a Cisco Unified MeetingPlace 8112 server or Cisco Unified MeetingPlace 8106 server.


Networking Requirements

Confirm that the system meets the following requirements so that the web server can communicate with the Cisco Unified MeetingPlace Audio Server system:

  • TCP ports 5003 and 5005 are open bidirectional between the web server and Cisco Unified MeetingPlace Audio Server systems (primary server and shadow server, if one exists).
  • The Cisco Unified MeetingPlace Audio Server system can initiate a reverse connection to the web server, thus eliminating the need for you to open port 5003 from the web server to the Audio Server. For the reverse connection to be initiated, you must enter the MeetingPlace Server name as a host name instead of an IP address during the Cisco Unified MeetingPlace Web Conferencing installation. You will also have to manually configure this web server unit on the Audio Server.
  • Connectivity between the web server and its host Cisco Unified MeetingPlace Audio Server system is of high quality and not subject to interruptions because of traffic congestion. Any time the round-trip latency exceeds 100 ms or there is more than 1 percent packet loss, you should expect a noticeable reduction in service quality.
  • The Cisco Unified MeetingPlace Audio Server system must be connected to a network switch port that is configured for auto-negotiate.
  • Cisco Unified MeetingPlace gateways must be connected to network switch ports that are configured for 100/1000 MB Full Duplex.


The following additional networking requirements must also be met for Web Conferencing:

  • The web server must be configured with two static IP addresses on the same subnet.
  • TCP port 1433 must be open bidirectional between the Web Conferencing server and SQL Server if SQL is installed remotely.


Software Requirements


Web Server Software Requirements

The Cisco Unified MeetingPlace Web Conferencing software runs on the Cisco MCS operating system. This operating system is included with the application. Cisco Unified MeetingPlace Web Conferencing Release 6.x requires Cisco MCS OS 2003.1.1 or later.


Additional Windows Requirements
  • Microsoft Internet Information Server (IIS) 6.0.
This is installed and configured on the Cisco MCS when the operating system is installed.
  • All corporate fonts and standard Microsoft fonts, including Microsoft PowerPoint fonts, installed.


SQL Server Requirements

Microsoft SQL Server 2000 and Service Pack 4 are included with the Web Conferencing 6.x installer. These required components install automatically on the Cisco MCS if you choose the local SQL Server installation option.

For Release 6.0(417.0) (Maintenance Release 3) and later only: Cisco Unified MeetingPlace Web Conferencing can now be used with Microsoft SQL Server 2005 for remote SQL Server-based deployments. Standard, local SQL Server deployments continue to use Microsoft SQL Server 2000 that can be automatically installed by the Cisco Unified MeetingPlace Web installer when you choose the local SQL Server option during installation.

To use Microsoft SQL Server 2005, you must first use the Microsoft installation program called SQLServer2005_BC.msi (Microsoft SQL Server 2005 Backward Compatibility Components) to install the version of SQL Distributed Management Objects (DMO) that is compatible with Microsoft SQL Server 2000 onto the Cisco Unified MeetingPlace Web Conferencing server. You only need to upgrade the SQL-DMO part and not the other four components covered by this installation program.


Notes:

  • If you are deploying Web Conferencing by using the remote SQL Server option, you must preinstall SQL Server 2000 with Service Pack 4 before you install Web Conferencing.
  • If you need to manually install SQL Server, you must install and configure your SQL Server to be case insensitive because Web Conferencing supports only SQL Server case-insensitive configurations. If you configure your SQL server to be case sensitive, Web Conferencing will not function properly.


Integration Requirements: Cisco Unified MeetingPlace Audio Server

Cisco Unified MeetingPlace Web Conferencing Release 6.x requires Cisco Unified MeetingPlace Audio Server Release 6.x, which must reside on an 8106 or 8112 server.


Additional Requirements
  • Access ports (voice)
  • Cisco Unified MeetingPlace WebPublisher Option Key
  • Cisco Unified MeetingPlace Data Conferencing Option Key (required for application sharing and presentations)
  • Cisco MeetingNotes Data Option Key (required for presentations and attachments)
  • Cisco MeetingNotes Voice Option Key (required for meeting recordings)
  • Cisco Unified MeetingPlace Video Integration Option Key (required for video conferencing)


Integration Requirements: Cisco Unified MeetingPlace for Outlook

Cisco Unified MeetingPlace Web Conferencing Release 6.x requires Cisco Unified MeetingPlace for Outlook Release 6.x.


You must upgrade both Web Conferencing and Cisco Unified MeetingPlace for Outlook at the same time.


Integration Requirements: Cisco Unified MeetingPlace SMTP E-Mail Gateway

Cisco Unified MeetingPlace Web Conferencing Release 6.x requires Cisco Unified MeetingPlace SMTP E-Mail Gateway Release 5.4.


Integration Requirements: Jabber Server

Cisco Unified MeetingPlace Web Conferencing Release 6.x requires Cisco Unified MeetingPlace Jabber Integration Release 6.x installed on a Jabber XCP 4.2 server with Sun Java Runtime Environment (JRE) 1.4.2.xx.

See also Requirements for Cisco Unified MeetingPlace for Jabber Release 6.x.


(Optional) Integration Requirements: Third Party Audio Conversion and Playback

Audio Conversion
  • A third-party audio service is not required to convert audio files to MP3, WAV or WMA format. Cisco Unified MeetingPlace Web Conferencing uses its internal audio service component and bundled encoders to convert audio attachments into these formats.


Streamed Playback
  • Windows Media Services
For full installation and configuration instructions, refer to the "Configuring the Windows Media Server" section in Configuring the Web Conferencing System for Optimal Data Storage.


(Optional) WebEx Requirements

WebEx functionality was introduced in Cisco Unified MeetingPlace Release 6.x maintenance release 2 (MR 2).


The following are the system requirements for a Cisco Unified MeetingPlace system integrated with WebEx:

WebEx

  • WebEx WBS26 system release or higher on your WebEx site
  • WebEx MeetingCenter or WebEx MeetingCenter Pro. WebEx SalesCenter is optional.

Cisco Unified MeetingPlace

  • Cisco Unified MeetingPlace Audio Server Release 6.0(2.13) (MR 2)
  • Cisco Unified MeetingPlace Web Conferencing Release 6.0(361.0) (MR 2)
  • One Cisco Unified MeetingPlace Web Conferencing server in the DMZ and one behind your firewall.


For more information, see How to Configure WebEx


Load Balancing Requirements

Cisco Unified MeetingPlace Web Conferencing load balancing makes use of an algorithmic formula to evenly distribute web-conferencing requests within clusters of web servers. The following section lists additional requirements for load balancing configurations.



Audio Server Requirements
  • All web servers within both internal and external clusters must point to the same Cisco Unified MeetingPlace Audio Server system.
  • You can attach a maximum of 16 Cisco MCSs running Cisco Unified MeetingPlace applications (for example, Cisco Unified MeetingPlace Web Conferencing, Cisco Unified MeetingPlace SMTP E-Mail Gateway) to the same Cisco Unified MeetingPlace Audio Server system.


Internal Web Server Cluster Requirements

If you have an internal web server cluster in your load balancing configuration, ensure the following:

  • All web servers within the internal cluster must share a single SQL Server database.
  • All web servers within the internal cluster must have access to a shared storage location for attachments.
  • Install Cisco Unified MeetingPlace Web Conferencing on each server sequentially (internal web server 1, internal web server 2, and so forth) with the following option: for Server Location, choose Internal (Full Access).
  • Make sure that all web servers within the internal cluster have the same deployment settings and configurations (for example, the same Replication Service and Audio Service parameters).


External Web Server Cluster Requirements

If you have an external web server cluster in your load balancing configuration, ensure the following:

  • All web servers within the external cluster must share a single SQL Server database.
Note: Make sure the internal cluster and external cluster use different databases.
  • All web servers within the external cluster must have access to a shared storage location (for attachments).
  • Install Cisco Unified MeetingPlace Web Conferencing on each server sequentially (external web server 1, external web server 2 and so forth) with the following option: for Server Location, choose External (Limited Access).
  • Make sure that all web servers within the external cluster have the same deployment settings and configurations (for example, the same Replication Service and Audio Service parameters).


Mixed Cluster Requirements

A mixed cluster has at least one internal cluster and one external cluster. If you have a mixed cluster in your load balancing configuration, ensure the following:

  • All requirements for internal web server clusters and external web server clusters are met.
  • The internal cluster's database and external cluster's database must contain identical GUIDS.


Port Access Requirements
  • TCP ports 8506 and 8507 must be open bidirectional between each Web Conferencing server in a load balancing cluster.


SSL Requirements

Secure Sockets Layer (SSL) is not compatible with Cisco Unified IP Phone integration and is not compatible with Windows Integrated Authentication (WIA).


Segmented Meeting Access Requirements

Cisco Unified MeetingPlace Web Conferencing supports Segmented Meeting Access - 2 Server (SMA-2S) deployments for external access.


Note: The Segmented Meeting Access - 1 Server (SMA-1S) deployment is no longer supported in Release 6.x.


The following requirements are in addition to standard Cisco Unified MeetingPlace Web Conferencing hardware and software system requirements as indicated in the Hardware Requirements and the Software Requirements. Make sure that you meet the following requirements before you attempt the SMA-2S deployment.


Hardware Requirements
  • Two single Cisco MCSs or clusters of Cisco MCSs (in the case of load balancing)
    • One server or cluster of servers deployed inside the private corporate network functioning as internal web servers.
    • One server or cluster of servers deployed in a network segment, such as a DMZ, functioning as external web servers.


Software Requirements
  • On internal web servers, Cisco Unified MeetingPlace Web Conferencing Release 6.x installed with the "Internal (Full Access)" server location option.
  • On external web servers, Cisco Unified MeetingPlace Web Conferencing Release 6.x installed with the "External (Limited Access)" server location option.


DNS Configuration Requirements
  • For segmented DNS, the same host name must resolve to the internal web server on the internal DNS and resolve to the external web server on the external DNS.
  • For information on configuring notification templates to accommodate nonsegmented DNS, see the administration guide for your particular Cisco Unified MeetingPlace notification application.
  • Make sure that the internal host names and IP addresses are accessible only from the internal network.
  • Make sure that the external host names or IP addresses are accessible from both the internal network and the Internet.


Port Access Requirements
  • Make sure that the following ports are open between the DMZ and the internal network:
    • TCP ports 5003 and 5005 are open bidirectional between the web server and the Cisco Unified MeetingPlace Audio Server systems (primary server and shadow server, if one exists).
If you configured your network for reverse connection, where your web servers are configured with a MeetingPlace Server hostname instead of an IP address, the Audio Server system can initiate a reverse connection to the web server in the DMZ when port 5003 inbound is blocked.
  • Make sure that the following ports are open inbound from the Internet to the DMZ:
    • TCP Port 80
    • TCP Port 1627 (strongly recommended for higher performance of the meeting console)
    • TCP Port 443(if SSL is implemented)


Additional Requirements
  • Synchronized GUIDS between Internal and DMZ servers
The database of the internal server and external server must contain identical GUIDS.


WebConnect Requirements

WebConnect is used to make web scheduling and meeting attendance seamless across multiple Cisco Unified MeetingPlace systems. Make sure that your system meets the following requirements before you configure WebConnect.


Note: We do not support the WebConnect feature on UNIX systems.


Cisco Unified MeetingPlace Audio Server Requirements
  • For Cisco Unified MeetingPlace Web Conferencing Release 6.x: Cisco Unified MeetingPlace Audio Server Release 6.x
  • Cisco Unified MeetingPlace MeetingTime Release 6.x with the following settings:
    • User profile > Sched only on scheduling home server? > No
    • User profile > Sched only on NS home site? > No
    • System Parameters > Allow Vanity Mtg IDs? > Yes


Additional Requirements
  • Make sure that all sites within the Cisco Unified MeetingPlace Image are running the same build-level release of Cisco Unified MeetingPlace Audio Server.
  • Make sure that all systems within a site have the same system options and notification vehicles. For example, MeetingNotes, Cisco Unified MeetingPlace SMTP E-Mail Gateway, Microsoft Outlook.
  • For external dedicated sites, make sure that you are using VPN (T1 or Frame Relay).
  • For rollover map configurations, make sure that you assign all users to a group.
Note: You must assign all groups to a rollover map (even if the rollover map only has one site).
  • You must have Cisco Unified MeetingPlace Directory Services or a similar profile synchronization procedure deployed on a dedicated server.


End-User Requirements

Make sure that user workstations meet the client requirements in this section, or provide these requirements to your users. All client machines must have separate Internet and telephony access for attending voice and web conferences. The recommended minimum bandwidth is a 56K modem connection. A lesser connection can slow down web-conferencing performance.


Service packs (SPs) listed are required minimums, and service pack releases later than the ones listed are assumed to work unless documented otherwise.


Client Requirements: Microsoft Windows

Table: Supported Web Browsers by Microsoft Windows Operating System Version
Operating System Version Supported Web Browsers

Windows Vista

  • Microsoft Internet Explorer 7.0 and later
  • Mozilla Firefox 1.5 or 2.0
  • Mozilla Firefox 3.0 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)

Windows XP (with SP1 or later)

  • Microsoft Internet Explorer 6.0 with SP1 or SP2
  • Microsoft Internet Explorer 7.0 and later
  • Mozilla Firefox 1.5 or 2.0
  • Mozilla Firefox 3.0 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)

Windows 2000 (with SP2 or later)

  • Microsoft Internet Explorer 5.5 SP2
  • Mozilla Firefox 1.5 or 2.0
  • Netscape 7.1



Requirements for Participating in a Cisco Unified MeetingPlace Web Conference
  • Adobe Flash Player 6.0.79 - Release 9.x
  • Adobe Flash Player 10 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)
  • (Optional) Audio player that plays WAV, WMA, or MP3 files.
  • (Optional, but strongly recommended) TCP port 1627 open from client-to-server on your firewall for direct inbound access.
If this port is not open, the meeting console establishes a slightly slower connection by tunneling through port 80.


Requirements for Sharing Desktop Content and Applications
  • Cisco Unified Presenter Add-In (can be downloaded from the Browser Test link on the Web Conferencing home page or from within the meeting console).


Additional Requirements for Video Conferencing

To make sure that your end-user system is set up for video conferencing, see Cisco Unified MeetingPlace Video Integration, Release 5.4 For Use With Release 6.x.


Requirements for Playing Meeting Recordings

To listen to voice recordings, users must have a corresponding audio player installed on their end-user systems. The following table lists the audio file formats supported by Cisco Unified MeetingPlace Web Conferencing as well as the encoder used to convert the format, the player, and media server responsible for each format.


Table: Audio Services Compatible with Cisco Unified MeetingPlace Web Conferencing

Media Service Encoder Player File Type
Windows Media Windows Media 9 Requires Windows Media Player 7 or a later release. .wma
N/A LAME MP3 Player .mp3


Note: See also the topics on About Audio File Conversion.

For example: We recommend that you configure Windows Media Server to enable streaming playback of your audio recordings. See To Configure the Windows Media Server. You must install and configure supported services and end-user applications in order for playback to work.

Typically, WAV files are supported by common web browsers and do not require a dedicated server, encoder, and player.


Note: If the server is running out of disk space while a current recording is being made, the system notifies all users that there is no more space available. To reduce the likelihood of this occurrence, see About Audio File Conversion.


Client Requirements: Apple Mac

Operating System

OS 10.2, 10.3, 10.4, or 10.5


Web Browser
  • Mozilla Firefox 1.5 or 2.0
  • Mozilla Firefox 3.0 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)
  • Mac Safari 1.1, 1.2, or 2.0
  • Mac Safari 3.0, 3.1, or 3.2 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)


Requirements for Participating in a Cisco Unified MeetingPlace Web Conference
  • Adobe Flash Player 6.0.79 - Release 9.x
  • Adobe Flash Player 10 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)
  • (Optional) Audio player that plays WAV, WMA, or MP3 files.
  • (Optional, but strongly recommended) TCP port 1627 open from client-to-server on your firewall for direct inbound access.
If this port is not open, the meeting console establishes a slightly slower connection by tunneling through port 80.


Requirements for Sharing Desktop Content and Applications
  • Cisco Unified Presenter Add-In (can be downloaded from the Browser Test link on the Web Conferencing home page or from within the meeting console).


Client Requirements: Sun Solaris

Operating System

Solaris 9 or a later release


Web Browser
  • Mozilla Firefox 1.5


Requirements For Participating in a Cisco Unified MeetingPlace Web Conference
  • Adobe Flash Player 6.0.79 - Release 9.x
  • Adobe Flash Player 10 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)
Screen sharing and file sharing from the desktop are not available on Unix systems. Users on these systems can share a whiteboard or meeting attachment, view shared files and make annotations, but they cannot share files that reside on their systems with other participants.
  • (Optional) Audio player that plays WAV, WMA, or MP3 files.


Client Requirements: RedHat Linux

Operating System

RedHat 9 or a later release


Web Browser
  • Mozilla Firefox 1.5 or later


Requirements For Participating in a Cisco Unified MeetingPlace Web Conference
  • Adobe Flash Player 6.0.79 - Release 9.x
  • Adobe Flash Player 10 (Cisco Unified MeetingPlace Maintenance Release 4 and later only)
Screen sharing and file sharing from the desktop are not available on Linux systems. Users on these systems can share a whiteboard or meeting attachment, view shared files and make annotations, but they cannot share files that reside on their systems with other participants.
  • (Optional) Audio player that plays WAV, WMA, or MP3 files.


Upgrade Requirements

Upgrading a legacy system to Cisco Unified MeetingPlace Web Conferencing Release 6.0 requires the following:

Note: If you are not using a HP or IBM exact equivalent, you must install Release 6.0 as a new installation on a supported Cisco MCS. For installation requirements, see the Hardware Requirements.
  • Windows Server 2003 Enterprise Edition
  • Microsoft Internet Information Server (IIS) 6.0
Microsoft IIS 6.0 is installed with Windows Server 2003
  • SQL Server 2000 (SP 4)
    • Cisco Unified MeetingPlace Web Conferencing requires the SQL Server Processor License option. For more information, see the Microsoft website.
  • Cisco Unified MeetingPlace Web Conferencing Release 5.4 or 5.3.


Caution! Do not delete the SQL Server database if you want to maintain your current click-to-attend links, attachments, and meeting recordings. Deleting or rebuilding your current database deletes all this information.

Rating: 0.0/5 (0 votes cast)

Personal tools