Cisco Unified MeetingPlace, Release 6.x -- Requirements for Cisco Unified MeetingPlace Audio Server 6.0

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m
m
Line 1: Line 1:
 +
'''For a new Release 6.0 system''', Cisco Unified MeetingPlace Audio Server software is installed in manufacturing, so you do not need to install Audio Server software.
-
For a new Release 6.0 system, Cisco Unified MeetingPlace Audio Server software is installed in manufacturing, so you do not need to install Audio Server software.
 
-
 
+
'''For upgrades''', if you have the Cisco Unified MeetingPlace Audio Server hardware and are using Audio Server Release 5.3 or 5.4 software, you must upgrade the software to Audio Server Release 6.0 yourself. (ACisco Unified MeetingPlace Audio Server system running version 5.2 cannot upgrade directly to Release 6.0. You must first upgrade to version 5.4, then upgrade to 6.0.)
-
For upgrades, if you have the Cisco Unified MeetingPlace Audio Server hardware and are using Audio Server Release 5.3 or 5.4 software, you must upgrade the software to Audio Server Release 6.0 yourself. (ACisco Unified MeetingPlace Audio Server system running version 5.2 cannot upgrade directly to Release 6.0. You must first upgrade to version 5.4, then upgrade to 6.0.)
+
* The Cisco Unified MeetingPlace Audio Server system requires a Cisco Unified MeetingPlace 8100 series server.
* The Cisco Unified MeetingPlace Audio Server system requires a Cisco Unified MeetingPlace 8100 series server.
: For environmental requirements and hardware specifications for the Cisco Unified MeetingPlace 8100 series server, see the [[Cisco Unified MeetingPlace, Release 6.x -- Requirements|Requirements]].
: For environmental requirements and hardware specifications for the Cisco Unified MeetingPlace 8100 series server, see the [[Cisco Unified MeetingPlace, Release 6.x -- Requirements|Requirements]].

Revision as of 01:56, 31 January 2008


For a new Release 6.0 system, Cisco Unified MeetingPlace Audio Server software is installed in manufacturing, so you do not need to install Audio Server software.


For upgrades, if you have the Cisco Unified MeetingPlace Audio Server hardware and are using Audio Server Release 5.3 or 5.4 software, you must upgrade the software to Audio Server Release 6.0 yourself. (ACisco Unified MeetingPlace Audio Server system running version 5.2 cannot upgrade directly to Release 6.0. You must first upgrade to version 5.4, then upgrade to 6.0.)

  • The Cisco Unified MeetingPlace Audio Server system requires a Cisco Unified MeetingPlace 8100 series server.
For environmental requirements and hardware specifications for the Cisco Unified MeetingPlace 8100 series server, see the Requirements.
  • The Cisco Unified MeetingPlace Audio Server must be connected to a network switch port that is configured for auto-negotiate. Cisco Unified MeetingPlace gateways must be connected to network switch ports that are configured for 100/1000 MB Full Duplex.
  • If the Cisco Unified MeetingPlace Audio Server is configured to use Cisco Unified CallManager in conjunction with a Cisco Unified MeetingPlace H.323/SIP Gateway, and if the Cisco Unified MeetingPlace H.323/SIP Gateway resides on a server with Cisco Unified MeetingPlace Web Conferencing, and if the network interface card (NIC) on the Cisco Unified MeetingPlace H.323/SIP Gateway is configured with more than one IP address, or there is more than one NIC, then you must do the following: In Cisco Unified CallManager, configure an H.323 Gateway to each NIC interface. Otherwise, outdials from the Cisco Unified MeetingPlace web interface may fail.

Rating: 0.0/5 (0 votes cast)

Personal tools