Cisco Unified MeetingPlace, Release 6.x -- Outlook Integration Changes for Cisco Unified MeetingPlace Release 6.0, Maintenance Release 5

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m
(Running the Migration Tool)
 
(20 intermediate revisions not shown)
Line 3: Line 3:
-
This page describes changes to the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 (MR5).
+
This page describes changes to the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 (MR5).
 +
 
 +
 
 +
== System Requirements ==
 +
 
 +
For a list of the system requirements for the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 (MR5), see [[Cisco Unified MeetingPlace, Release 6.x -- Requirements for Cisco Unified MeetingPlace for Microsoft Outlook 6.0|Requirements for Cisco Unified MeetingPlace for Microsoft Outlook 6.0]].
 +
 
 +
Note the following:
 +
 
 +
* You no longer need to install Microsoft Outlook or CDO on the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5.
 +
 
 +
* For Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5: Exchange 2000 Server (Service Pack 2), Exchange Server 2003, or Exchange 2007 Server (Service Pack 1 Rollup 7), installed and running. Also, the Exchange server must be configured to use SMTP relay for the Cisco Unified MeetingPlace account.
 +
 
 +
* Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 now supports Microsoft Outlook 2007 Service Pack 2.
 +
 
 +
* If you use plain text or plain text over TLS authentication, all users must grant the "Send As" right to the user that the Microsoft Outlook integration is authenticating as against the Microsoft Exchange server. If anonymous access is allowed, this setting is not required.
 +
 
 +
 
 +
== About Microsoft Outlook and SMTP/MAPI ==
 +
 
 +
* Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 requires that Microsoft Exchange has a valid SMTP connector configured. We support "Anonymous", "Plain Text" and "Plain Text over TLS" authentication schemes.
 +
 
 +
* MAPI uses Microsoft Exchange proprietary protocols to communicate between the Microsoft Outlook gateway and the Microsoft Exchange server.
 +
 
 +
* SMTP is a standard, widely used, plain text-based, mailing protocol. It typically runs on TCP port 25.
 +
 
 +
 
 +
 
 +
=== About TLS ===
 +
 
 +
TLS, which is a newer version of SSL, is a secure tunneling protocol that can be used on top of SMTP. When used, the SMTP connection is initiated normally and then TLS handshaking takes place, a process during which the client and the server exchange their digital certificates and confirm that other party’s certificate can be trusted. After the handshaking process succeeds, the encrypted communication channel is initiated and any further communication, including user credentials and email transmission, can not be intercepted or modified.
 +
 
 +
There are two authentication options in Cisco Unified MeetingPlace Release 6.0 MR5: none and plain text. If no authentication is selected, then the Microsoft Exchange server SMTP connector must support anonymous senders. If it does not, then plain text authentication must be performed before any emails can be transmitted. Plain text authentication means that the username and password are sent to the Microsoft Exchange server in a format that can easily be sniffed out (unless a TLS tunnel is used).
 +
 
 +
Depending on the physical network configuration, you need to decide if you will require authentication on SMTP at all, and if you do, whether you need to secure communication between the Microsoft Outlook integration and the Microsoft Exchange server.
 +
 
 +
 
 +
 
 +
== Connecting to the MPWeb Database ==
 +
 
 +
Prior to Cisco Unified MeetingPlace Release 6.0 MR5, Microsoft Outlook integrations used a Microsoft Exchange calendar to keep track of previously delivered emails, which are needed to send proper update notifications. Cisco Unified MeetingPlace Release 6.0 MR5 stores this information in the MPWeb database. Because of this, you must supply SQL Server credentials during the setup process.
 +
 
 +
* If you install the Microsoft Outlook integration on a server that already has MPWeb installed, it will automatically detect the MPWeb parameters. You can let the Microsoft Outlook integration use the MPWeb parameters by selecting “Use local MPWeb database configuration” in the “MeetingPlace Web Conferencing SQL Server Database” group on the MP Control Panel.
 +
 
 +
* If you install the Microsoft Outlook integration on a server that does not have MPWeb installed, you must manually enter a username, password, and SQL Server name for the MPWeb database.
 +
 
Line 10: Line 55:
This is a one-way process of getting meeting notifications from the Audio Server to the Microsoft Outlook integration, through several Cisco Unified MeetingPlace components. The MPWeb database is the only one used to both store and retrieve data; this is required to support update
This is a one-way process of getting meeting notifications from the Audio Server to the Microsoft Outlook integration, through several Cisco Unified MeetingPlace components. The MPWeb database is the only one used to both store and retrieve data; this is required to support update
notifications with iCalendar.  When sending an updated meeting notification, you need to have information about the previous notifications sent for the same meeting.
notifications with iCalendar.  When sending an updated meeting notification, you need to have information about the previous notifications sent for the same meeting.
 +
 +
 +
When a meeting is scheduled, the system sends a meeting notification to the meeting scheduler from the account that is configured in the gateway configuration utility, but sends a meeting notification to everyone else from the meeting scheduler.
Line 31: Line 79:
-
==== Front-End and Back-End, Connecting to Remote MPWeb Database =====
+
==== Front-End and Back-End, Connecting to Remote MPWeb Database ====
You can install both the front-end and back-end notification mechanisms on a machine, and configure the back-end to connect to the
You can install both the front-end and back-end notification mechanisms on a machine, and configure the back-end to connect to the
Line 39: Line 87:
==== Front-End Only ====
==== Front-End Only ====
-
You can install only the front-end notification mechanism on a machine. You can configure this during the installation. This configuration is suitable for users that only use Outlook to schedule their MeetingPlace meetings. Invitations for meetings scheduled through MPWeb will not be delivered to Outlook users.
+
You can install only the front-end notification mechanism on a machine. You can configure this during the installation. This configuration is suitable for users that only use Outlook to schedule their Cisco Unified MeetingPlace meetings. Invitations for meetings scheduled through MPWeb will not be delivered to Microsoft Outlook users.
Line 47: Line 95:
== Migrating to Cisco Unified MeetingPlace Release 6.0 MR5 and the iCalendar-Based Back-End ==
== Migrating to Cisco Unified MeetingPlace Release 6.0 MR5 and the iCalendar-Based Back-End ==
-
When installing Cisco Unified MeetingPlace Release 6.0 MR5 on a machine that previously did not have an older version of the Microsoft Outlook integration, no special steps are required. Just run setup.exe and follow the instructions on the screen.
+
When installing Cisco Unified MeetingPlace Release 6.0 MR5 on a system that previously did not have an older version of the Microsoft Outlook integration, no special steps are required. Just run setup.exe and follow the instructions on the screen.
 +
 
 +
If you have an older version of the Microsoft Outlook integration installed on the system, you must run the migration tool, to migrate information about delivered notifications from the dedicated calendar in Microsoft Exchange to a table in the MPWeb database.
 +
 
 +
Note that you cannot just uninstall the older version and install the newer version of the Microsoft Outlook integration.  If you do this, the system will work; however, all information about previously delivered meeting notifications, which are stored in the dedicated calendar, will not be used. This means that update notifications for meetings for which notifications were previously sent out by the older version of the Microsoft Outlook integration will appear as new meeting invitations, instead of updated notifications for old meetings.
 +
 
 +
If you manually uninstall the previous version, the migration tool cannot perform the migration, because uninstalling the previous version is part of the migration process. If you accidentally uninstall the older version, re-install the old version, connect it to the old dedicated calendar, and then migrate the system using the migration tool.
-
If you have an older version of the Microsoft Outlook integration installed on the machine, you must run the migration tool, to migrate information about delivered notifications from dedicated calendar in Exchange to a table in MPWeb database.
 
=== Upgrading to Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 ===
=== Upgrading to Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 ===
 +
 +
To run the migration tool, you must have an email profile that connects to the Microsoft Exchange server that hosts the dedicated calendar. The email profile will use this MAPI connection to retrieve information about the meeting notifications delivered by the previous version. We recommend that you run the tool as the user who installed the previous version.
 +
 +
# Upgrade Cisco Unified MeetingPlace Web Conferencing and Gateway SIM to MR5.  See [[Cisco Unified MeetingPlace, Release 6.x -- Upgrading to Cisco Unified MeetingPlace Release 6.0|Upgrading to Cisco Unified MeetingPlace Release 6.0]].
# Upgrade Cisco Unified MeetingPlace Web Conferencing and Gateway SIM to MR5.  See [[Cisco Unified MeetingPlace, Release 6.x -- Upgrading to Cisco Unified MeetingPlace Release 6.0|Upgrading to Cisco Unified MeetingPlace Release 6.0]].
Line 65: Line 122:
# Customize your notification templates. (Because this is a new version of the Microsoft Outlook integration, the customized templates use a new format. If you customized any templates in your previous release, you will have to customize them again. Templates from previous releases will not work and will result in corrupted notifications.)  See [[Cisco Unified MeetingPlace, Release 6.x -- Outlook Integration Changes for Cisco Unified MeetingPlace Release 6.0, Maintenance Release 5#Customizing the Microsoft Outlook Templates|Customizing the Microsoft Outlook Templates]].
# Customize your notification templates. (Because this is a new version of the Microsoft Outlook integration, the customized templates use a new format. If you customized any templates in your previous release, you will have to customize them again. Templates from previous releases will not work and will result in corrupted notifications.)  See [[Cisco Unified MeetingPlace, Release 6.x -- Outlook Integration Changes for Cisco Unified MeetingPlace Release 6.0, Maintenance Release 5#Customizing the Microsoft Outlook Templates|Customizing the Microsoft Outlook Templates]].
# Check your anti-virus rules, as they may need to be adjusted. (McAfee will give you more protection than you need here.)
# Check your anti-virus rules, as they may need to be adjusted. (McAfee will give you more protection than you need here.)
 +
Line 70: Line 128:
=== Running the Migration Tool  ===
=== Running the Migration Tool  ===
-
The migration tool is a file called MPOLMig.exe, which is shipped with each version of the Microsoft Outlook integration installation program for MR5.  
+
 
 +
The migration tool is a file called MPOLMig.exe, which is shipped with each version of the Microsoft Outlook integration installation program for MR5. You only need to use this tool if you are upgrading from an earlier release. There are no other requirements.
 +
 
 +
'''NOTE:''' Do not run the MPOLMig.exe script from your desktop. The path to the MPOLMig.exe script must not contain any spaces or the script doesn't execute properly and will not automatically install Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 following the reboot.
==== Migration Tool Syntax ====
==== Migration Tool Syntax ====
-
MPOLMig.exe [-e <eprofile> [<epwd>]] [-s <shost> [<suser> [<spwd>]]] [-i <ipath>] [-?]
+
MPOLMig.exe [-e <eprofile> [<epwd>]] [-s <shost> [<suser> [<spwd>]]] [-i <ipath>] [-g <sysid>] [-?]
==== Migration Tool Arguments ====
==== Migration Tool Arguments ====
 +
*  -e:  Use to enter the mail profile information to use to connect to the Microsoft Exchange server.
*  -s:  Use to supply the name of the remote MPWeb database and the log on credentials (if you are not using the local MPWeb database).
*  -s:  Use to supply the name of the remote MPWeb database and the log on credentials (if you are not using the local MPWeb database).
-
 
+
*  -i:  Use to specify the path of the migration tool if you are running the migration tool from a directory other than the one containing the setup.exe file.
-
*  -i:  Use to specify the path of the migration toll if you are running the migration tool from a directory other than the one containing the setup.exe file.
+
*  -g:  Use to supply the name of the GUIDS system ID.
-
 
+
-
*  -e:  Use to skip the prompt for choosing the mail profile to use to connect to the Exchange.
+
Line 90: Line 150:
==== Migration Tool Inputs ====
==== Migration Tool Inputs ====
-
* eprofile: The name of the mail profile to use to connect to the Exchange Server.
+
* eprofile: The name of the mail profile to use to connect to the Exchange server.
-
* epwd: The password for the eprofile.
+
* epwd: The password for the eprofile.
-
* shost: The SQL Server which stores the notification information.
+
*: '''NOTE:''' If you do not enter the Microsoft Exchange profile information, the system prompts you to log in.  
-
* suser: The account name to use to connect to the SQL Server.
+
-
* spwd: The password for the suser.
+
-
* ipath: The path to the new installation executable file.
+
 +
* shost:  The SQL Server which stores the notification information.
 +
* suser:  The account name to use to connect to the SQL Server.
 +
* spwd:  The password for the suser.
 +
*: '''NOTE:''' If you are migrating from a system that already has MPWeb installed, the system will use the values for the shost, suser, and spwd. If you are not installing on a system that has MPWeb installed, or if you do not want to use the same database for MPWeb and the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR5, you can manually configure the database connection using these parameters.
-
'''NOTE:''' If the Exchange profile information is not entered, the system prompts you to log in. If the SQL Server information is not entered, this tool will attempt to discover it automatically.
+
* ipath: The path to the new installation executable file.  Use this only if the setup.exe fiel  is not in the same folder as mpolmig.exe, which should normally never happen.
 +
* sysid:  The GUIDS system ID.  This parameter is only required when the migration tool does not find it automatically. In this case, the tool gives a warning message and prompts you for the sysid.  The only known scenario for this is if you are migrating a Microsoft Outlook integration for Cisco Unified MeetingPlace that was installed on a WebConnect-enabled-MPWeb server.
=== Customizing the Microsoft Outlook Templates ===
=== Customizing the Microsoft Outlook Templates ===
 +
 +
 +
'''NOTE:''' Microsoft Word does not support full HTML formatting. Examples of unsupported tags are  textarea, td, th, and frame. Refer to the following document for a list of which tags and CSS properties are not supported then format your templates accordingly. You may need to remove additional HTML tags that Microsoft Word inserts after formatting.
 +
 +
http://msdn.microsoft.com/en-us/library/aa338201.aspx#Word2007MailHTMLandCSS_SupportedHTMLElementsAttributesandCSSProperties
 +
Follow these steps to customize the templates.
Follow these steps to customize the templates.
Line 114: Line 182:
# Open the .txt file in Microsoft Word.
# Open the .txt file in Microsoft Word.
# Select '''Edit > Replace'''.
# Select '''Edit > Replace'''.
-
# Make the following replacements, in this order. (Do not enter the quotes):
+
# Make the following replacements, in this order. (Do not enter the quotes or spaces between characters):
-
#* Replace <nowiki>"& l t ; ! - - "</nowiki> with <nowiki>"<!--"</nowiki>
+
#* Replace <nowiki>"& l t ; ! - - "</nowiki> with <nowiki>"< ! - - "</nowiki> '''NOTE:''' There are no spaces between the characters, but that is the only way to format it in the DocWiki.
-
#* Replace <nowiki>" - - & g t ; " with "-->"</nowiki>
+
#* Replace <nowiki>" - - & g t ; " with " - - >"</nowiki> '''NOTE:''' There are no spaces between the characters, but that is the only way to format it in the DocWiki.
#* Replace <nowiki>"^p" with " "(a space)</nowiki>
#* Replace <nowiki>"^p" with " "(a space)</nowiki>
# Save the file as plain text by choosing '''Plain Text''' in the "Save as type" box and change the extension of the file to .tpl.  
# Save the file as plain text by choosing '''Plain Text''' in the "Save as type" box and change the extension of the file to .tpl.  
# Select '''Save'''.
# Select '''Save'''.
 +
 +
 +
 +
== About Upgrading to Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 from Microsoft Outlook for Cisco Unified MeetingPlace Release 5.3 or Release 5.4 ==
 +
 +
 +
You cannot upgrade to Microsoft Outlook for Cisco Unified MeetingPlace '''Release 6.0 MR5''' from Microsoft Outlook for Cisco Unified MeetingPlace '''Release 5.3 or Release 5.4''' because of different system architectures.  If you have Cisco Unified MeetingPlace Release 5.3 or Release 5,4, you must first upgrade your entire system to Cisco Unified MeetingPlace Release 6.0 Maintenance Release 4 and then upgrade to Maintenance Release 5.
 +
 +
 +
That upgrade process includes the following steps:
 +
 +
* Install the Microsoft Exchange 2003 operating system and associated patches.
 +
* Configure the servers (IP, DNS, and WINS).
 +
* Install Microsoft Outlook 2003.
 +
* Install Cisco Unified MeetingPlace Release 6.0 MR4, including Web Conferencing.
 +
* Install the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR4.
 +
* Upgrade to Cisco Unified MeetingPlace Release 6.0 MR5, including Web Conferencing.
 +
* Follow the steps above to upgrade to Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR5.
 +
* Customize the notification templates as needed.
 +
 +
'''NOTE: ''' You must install Cisco Unified MeetingPlace '''Web Conferencing''' Release 6.0 MR4 for this upgrade; otherwise, you will not be able to install the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR4 because the GWSIM will be the wrong version.

Latest revision as of 03:11, 31 October 2012

Cisco Unified MeetingPlace, Release 6.x


This page describes changes to the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 (MR5).


Contents

System Requirements

For a list of the system requirements for the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 (MR5), see Requirements for Cisco Unified MeetingPlace for Microsoft Outlook 6.0.

Note the following:

  • You no longer need to install Microsoft Outlook or CDO on the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5.
  • For Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5: Exchange 2000 Server (Service Pack 2), Exchange Server 2003, or Exchange 2007 Server (Service Pack 1 Rollup 7), installed and running. Also, the Exchange server must be configured to use SMTP relay for the Cisco Unified MeetingPlace account.
  • Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 now supports Microsoft Outlook 2007 Service Pack 2.
  • If you use plain text or plain text over TLS authentication, all users must grant the "Send As" right to the user that the Microsoft Outlook integration is authenticating as against the Microsoft Exchange server. If anonymous access is allowed, this setting is not required.


About Microsoft Outlook and SMTP/MAPI

  • Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 requires that Microsoft Exchange has a valid SMTP connector configured. We support "Anonymous", "Plain Text" and "Plain Text over TLS" authentication schemes.
  • MAPI uses Microsoft Exchange proprietary protocols to communicate between the Microsoft Outlook gateway and the Microsoft Exchange server.
  • SMTP is a standard, widely used, plain text-based, mailing protocol. It typically runs on TCP port 25.


About TLS

TLS, which is a newer version of SSL, is a secure tunneling protocol that can be used on top of SMTP. When used, the SMTP connection is initiated normally and then TLS handshaking takes place, a process during which the client and the server exchange their digital certificates and confirm that other party’s certificate can be trusted. After the handshaking process succeeds, the encrypted communication channel is initiated and any further communication, including user credentials and email transmission, can not be intercepted or modified.

There are two authentication options in Cisco Unified MeetingPlace Release 6.0 MR5: none and plain text. If no authentication is selected, then the Microsoft Exchange server SMTP connector must support anonymous senders. If it does not, then plain text authentication must be performed before any emails can be transmitted. Plain text authentication means that the username and password are sent to the Microsoft Exchange server in a format that can easily be sniffed out (unless a TLS tunnel is used).

Depending on the physical network configuration, you need to decide if you will require authentication on SMTP at all, and if you do, whether you need to secure communication between the Microsoft Outlook integration and the Microsoft Exchange server.


Connecting to the MPWeb Database

Prior to Cisco Unified MeetingPlace Release 6.0 MR5, Microsoft Outlook integrations used a Microsoft Exchange calendar to keep track of previously delivered emails, which are needed to send proper update notifications. Cisco Unified MeetingPlace Release 6.0 MR5 stores this information in the MPWeb database. Because of this, you must supply SQL Server credentials during the setup process.

  • If you install the Microsoft Outlook integration on a server that already has MPWeb installed, it will automatically detect the MPWeb parameters. You can let the Microsoft Outlook integration use the MPWeb parameters by selecting “Use local MPWeb database configuration” in the “MeetingPlace Web Conferencing SQL Server Database” group on the MP Control Panel.
  • If you install the Microsoft Outlook integration on a server that does not have MPWeb installed, you must manually enter a username, password, and SQL Server name for the MPWeb database.


iCalendar-Based Back-End

This is a one-way process of getting meeting notifications from the Audio Server to the Microsoft Outlook integration, through several Cisco Unified MeetingPlace components. The MPWeb database is the only one used to both store and retrieve data; this is required to support update notifications with iCalendar. When sending an updated meeting notification, you need to have information about the previous notifications sent for the same meeting.


When a meeting is scheduled, the system sends a meeting notification to the meeting scheduler from the account that is configured in the gateway configuration utility, but sends a meeting notification to everyone else from the meeting scheduler.


Supported Configurations

Both the front-end and the back-end notification mechanisms for the Microsoft Outlook gateway depend on the MPWeb, but in different ways. The front-end notification mechanism requires MPWeb to be present on the machine that runs the gateway. This is because ASP logic in the front end relies on MPAgent / MPX (which are part of the MPWeb) to do template processing.

The new iCalendar back-end notification mechanism requires a connection to the MPWeb SQL database to keep information about delivered notifications. Since ODBC is used to connect to the MPWeb database, the back-end does not require that the MPWeb is on the same machine, just that it is accessible via TCP/IP.


Front-End and Back-End, Connecting to Local MPWeb Database

You can install both the front-end and back-end notification mechanisms on a machine, and configure the back-end to connect to the local MPWeb SQL Database. By default, the installation program will attempt to use this configuration by examining the Windows registry. This is a common configuration suitable for most users.


Back-End Only, Connecting to Remote MPWeb Database

During the installation, you can select to install the back-end notification mechanism only. You will be prompted to enter the name of the MPWeb machine which runs the SQL database that you want to use. Once installed, you can change the MPWeb machine you connect to by using the MP Control Panel. This configuration is useful if you want to support only back-end notifications, and keep the MPWeb server load low.


Front-End and Back-End, Connecting to Remote MPWeb Database

You can install both the front-end and back-end notification mechanisms on a machine, and configure the back-end to connect to the database on a different MPWeb server. You can configure this during installation, or by using the MP Control Panel after the installation has finished. This configuration might be suitable for clustered environments.


Front-End Only

You can install only the front-end notification mechanism on a machine. You can configure this during the installation. This configuration is suitable for users that only use Outlook to schedule their Cisco Unified MeetingPlace meetings. Invitations for meetings scheduled through MPWeb will not be delivered to Microsoft Outlook users.



Migrating to Cisco Unified MeetingPlace Release 6.0 MR5 and the iCalendar-Based Back-End

When installing Cisco Unified MeetingPlace Release 6.0 MR5 on a system that previously did not have an older version of the Microsoft Outlook integration, no special steps are required. Just run setup.exe and follow the instructions on the screen.

If you have an older version of the Microsoft Outlook integration installed on the system, you must run the migration tool, to migrate information about delivered notifications from the dedicated calendar in Microsoft Exchange to a table in the MPWeb database.

Note that you cannot just uninstall the older version and install the newer version of the Microsoft Outlook integration. If you do this, the system will work; however, all information about previously delivered meeting notifications, which are stored in the dedicated calendar, will not be used. This means that update notifications for meetings for which notifications were previously sent out by the older version of the Microsoft Outlook integration will appear as new meeting invitations, instead of updated notifications for old meetings.

If you manually uninstall the previous version, the migration tool cannot perform the migration, because uninstalling the previous version is part of the migration process. If you accidentally uninstall the older version, re-install the old version, connect it to the old dedicated calendar, and then migrate the system using the migration tool.



Upgrading to Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5

To run the migration tool, you must have an email profile that connects to the Microsoft Exchange server that hosts the dedicated calendar. The email profile will use this MAPI connection to retrieve information about the meeting notifications delivered by the previous version. We recommend that you run the tool as the user who installed the previous version.


  1. Upgrade Cisco Unified MeetingPlace Web Conferencing and Gateway SIM to MR5. See Upgrading to Cisco Unified MeetingPlace Release 6.0.
  2. Run the migration tool, called MPOLMig.exe, (see below). This may take a while if there are a lot of meetings in the calendar.
    This migration tool does the following:
    • Moves all the scheduled meetings to the MPWeb database.
    • Uninstalls the old version of the Microsoft Outlook integration.
    • Reboots.
    • Automatically installs Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5.
  3. Reboot the machine.
  4. Customize your notification templates. (Because this is a new version of the Microsoft Outlook integration, the customized templates use a new format. If you customized any templates in your previous release, you will have to customize them again. Templates from previous releases will not work and will result in corrupted notifications.) See Customizing the Microsoft Outlook Templates.
  5. Check your anti-virus rules, as they may need to be adjusted. (McAfee will give you more protection than you need here.)



Running the Migration Tool

The migration tool is a file called MPOLMig.exe, which is shipped with each version of the Microsoft Outlook integration installation program for MR5. You only need to use this tool if you are upgrading from an earlier release. There are no other requirements.

NOTE: Do not run the MPOLMig.exe script from your desktop. The path to the MPOLMig.exe script must not contain any spaces or the script doesn't execute properly and will not automatically install Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 following the reboot.


Migration Tool Syntax

MPOLMig.exe [-e <eprofile> [<epwd>]] [-s <shost> [<suser> [<spwd>]]] [-i <ipath>] [-g <sysid>] [-?]


Migration Tool Arguments

  • -e: Use to enter the mail profile information to use to connect to the Microsoft Exchange server.
  • -s: Use to supply the name of the remote MPWeb database and the log on credentials (if you are not using the local MPWeb database).
  • -i: Use to specify the path of the migration tool if you are running the migration tool from a directory other than the one containing the setup.exe file.
  • -g: Use to supply the name of the GUIDS system ID.


Migration Tool Inputs

  • eprofile: The name of the mail profile to use to connect to the Exchange server.
  • epwd: The password for the eprofile.
    NOTE: If you do not enter the Microsoft Exchange profile information, the system prompts you to log in.
  • shost: The SQL Server which stores the notification information.
  • suser: The account name to use to connect to the SQL Server.
  • spwd: The password for the suser.
    NOTE: If you are migrating from a system that already has MPWeb installed, the system will use the values for the shost, suser, and spwd. If you are not installing on a system that has MPWeb installed, or if you do not want to use the same database for MPWeb and the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR5, you can manually configure the database connection using these parameters.
  • ipath: The path to the new installation executable file. Use this only if the setup.exe fiel is not in the same folder as mpolmig.exe, which should normally never happen.
  • sysid: The GUIDS system ID. This parameter is only required when the migration tool does not find it automatically. In this case, the tool gives a warning message and prompts you for the sysid. The only known scenario for this is if you are migrating a Microsoft Outlook integration for Cisco Unified MeetingPlace that was installed on a WebConnect-enabled-MPWeb server.

Customizing the Microsoft Outlook Templates

NOTE: Microsoft Word does not support full HTML formatting. Examples of unsupported tags are textarea, td, th, and frame. Refer to the following document for a list of which tags and CSS properties are not supported then format your templates accordingly. You may need to remove additional HTML tags that Microsoft Word inserts after formatting.

http://msdn.microsoft.com/en-us/library/aa338201.aspx#Word2007MailHTMLandCSS_SupportedHTMLElementsAttributesandCSSProperties


Follow these steps to customize the templates.

  1. Open Microsoft Word.
  2. Open an RTF-formatted .tpl file.
  3. Choose File > Save As.
  4. Choose Web Page, Filtered in the "Save as type" box.
  5. Select Save.
  6. Close the file.
  7. Using Microsoft Explorer, change the extension of this new .htm file to a .txt extension.
  8. Open the .txt file in Microsoft Word.
  9. Select Edit > Replace.
  10. Make the following replacements, in this order. (Do not enter the quotes or spaces between characters):
    • Replace "& l t ; ! - - " with "< ! - - " NOTE: There are no spaces between the characters, but that is the only way to format it in the DocWiki.
    • Replace " - - & g t ; " with " - - >" NOTE: There are no spaces between the characters, but that is the only way to format it in the DocWiki.
    • Replace "^p" with " "(a space)
  11. Save the file as plain text by choosing Plain Text in the "Save as type" box and change the extension of the file to .tpl.
  12. Select Save.


About Upgrading to Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 from Microsoft Outlook for Cisco Unified MeetingPlace Release 5.3 or Release 5.4

You cannot upgrade to Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 MR5 from Microsoft Outlook for Cisco Unified MeetingPlace Release 5.3 or Release 5.4 because of different system architectures. If you have Cisco Unified MeetingPlace Release 5.3 or Release 5,4, you must first upgrade your entire system to Cisco Unified MeetingPlace Release 6.0 Maintenance Release 4 and then upgrade to Maintenance Release 5.


That upgrade process includes the following steps:

  • Install the Microsoft Exchange 2003 operating system and associated patches.
  • Configure the servers (IP, DNS, and WINS).
  • Install Microsoft Outlook 2003.
  • Install Cisco Unified MeetingPlace Release 6.0 MR4, including Web Conferencing.
  • Install the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR4.
  • Upgrade to Cisco Unified MeetingPlace Release 6.0 MR5, including Web Conferencing.
  • Follow the steps above to upgrade to Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR5.
  • Customize the notification templates as needed.

NOTE: You must install Cisco Unified MeetingPlace Web Conferencing Release 6.0 MR4 for this upgrade; otherwise, you will not be able to install the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 MR4 because the GWSIM will be the wrong version.

Rating: 0.0/5 (0 votes cast)

Personal tools