Cisco Unified MeetingPlace, Release 6.x -- Outlook Integration Changes for Cisco Unified MeetingPlace Release 6.0, Maintenance Release 5

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(added new page)
m
Line 47: Line 47:
== Migrating to MR5 and the iCalendar-Based Back-End ==
== Migrating to MR5 and the iCalendar-Based Back-End ==
-
When installing MR5 on a machine that previously did not run an older version of the Microsoft Outlook integration, no special steps are required. Just run setup.exe and follow instructions on the screen.
+
When installing MR5 on a machine that previously did not have an older version of the Microsoft Outlook integration, no special steps are required. Just run setup.exe and follow instructions on the screen.
If you have an older version of the Microsoft Outlook integration installed on the machine, you must run the migration tool, to migrate information about delivered notifications from dedicated calendar in Exchange to a table in MPWeb database.  
If you have an older version of the Microsoft Outlook integration installed on the machine, you must run the migration tool, to migrate information about delivered notifications from dedicated calendar in Exchange to a table in MPWeb database.  
-
Note: Before you start the migration tool, first upgrade the MPWeb database and GWSIM to MR5.
+
 
 +
 
 +
=== Summary of Upgrade Steps for MR5 ===
 +
 
 +
# Upgrade the Cisco Unified MeetingPlace Web Conferencing and Gateway SIM to MR5.  See [[Cisco Unified MeetingPlace, Release 6.x -- Upgrading to Cisco Unified MeetingPlace Release 6.0|Upgrading to Cisco Unified MeetingPlace Release 6.0]].
 +
# Run the migration tool, called MPOLMig.exe, (see below) to import calendar information into SQL.  This may take a while if there are a lot of meetings in the calendar.
 +
# Back up all of your notification templates.
 +
# Uninstall the old version of the Microsoft Outlook integration.
 +
# Install Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 by running setup.exe.  Follow the instructions on the screen.
 +
# Check your anti-virus rules, as they may need to be adjusted. (McAfee will give you more protection than you need here.)
 +
 

Revision as of 22:11, 13 August 2009

Cisco Unified MeetingPlace, Release 6.x


This page describes changes to the Microsoft Outlook integration for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 (MR5).


Contents

iCalendar-Based Back-End

This is a one-way process of getting meeting notifications from the Audio Server to the Microsoft Outlook integration, through several Cisco Unified MeetingPlace components. The MPWeb database is the only one used to both store and retrieve data; this is required to support update notifications with iCalendar. When sending an updated meeting notification, you need to have information about the previous notifications sent for the same meeting.


Supported Configurations

Both the front-end and the back-end notification mechanisms for the Microsoft Outlook gateway depend on the MPWeb, but in different ways. The front-end notification mechanism requires MPWeb to be present on the machine that runs the gateway. This is because ASP logic in the front end relies on MPAgent / MPX (which are part of the MPWeb) to do template processing.

The new iCalendar back-end notification mechanism requires a connection to the MPWeb SQL database to keep information about delivered notifications. Since ODBC is used to connect to the MPWeb database, the back-end does not require that the MPWeb is on the same machine, just that it is accessible via TCP/IP.


Front-End and Back-End, Connecting to Local MPWeb Database

You can install both the front-end and back-end notification mechanisms on a machine, and configure the back-end to connect to the local MPWeb SQL Database. By default, the installation program will attempt to use this configuration by examining the Windows registry. This is a common configuration suitable for most users.


Back-End Only, Connecting to Remote MPWeb Database

During the installation, you can select to install the back-end notification mechanism only. You will be prompted to enter the name of the MPWeb machine which runs the SQL database that you want to use. Once installed, you can change the MPWeb machine you connect to by using the MP Control Panel. This configuration is useful if you want to support only back-end notifications, and keep the MPWeb server load low.


Front-End and Back-End, Connecting to Remote MPWeb Database =

You can install both the front-end and back-end notification mechanisms on a machine, and configure the back-end to connect to the database on a different MPWeb server. You can configure this during installation, or by using the MP Control Panel after the installation has finished. This configuration might be suitable for clustered environments.


Front-End Only

You can install only the front-end notification mechanism on a machine. You can configure this during the installation. This configuration is suitable for users that only use Outlook to schedule their MeetingPlace meetings. Invitations for meetings scheduled through MPWeb will not be delivered to Outlook users.



Migrating to MR5 and the iCalendar-Based Back-End

When installing MR5 on a machine that previously did not have an older version of the Microsoft Outlook integration, no special steps are required. Just run setup.exe and follow instructions on the screen.

If you have an older version of the Microsoft Outlook integration installed on the machine, you must run the migration tool, to migrate information about delivered notifications from dedicated calendar in Exchange to a table in MPWeb database.


Summary of Upgrade Steps for MR5

  1. Upgrade the Cisco Unified MeetingPlace Web Conferencing and Gateway SIM to MR5. See Upgrading to Cisco Unified MeetingPlace Release 6.0.
  2. Run the migration tool, called MPOLMig.exe, (see below) to import calendar information into SQL. This may take a while if there are a lot of meetings in the calendar.
  3. Back up all of your notification templates.
  4. Uninstall the old version of the Microsoft Outlook integration.
  5. Install Microsoft Outlook for Cisco Unified MeetingPlace Release 6.0 Maintenance Release 5 by running setup.exe. Follow the instructions on the screen.
  6. Check your anti-virus rules, as they may need to be adjusted. (McAfee will give you more protection than you need here.)



Running the Migration Tool

The migration tool is a file called MPOLMig.exe, which is shipped with each version of the Microsoft Outlook integration installation program for MR5.


Migration Tool Syntax

MPOLMig.exe [-e <eprofile> [<epwd>]] [-s <shost> [<suser> [<spwd>]]] [-i <ipath>] [-?]


Migration Tool Arguments

  • -s: Use to supply the name of the remote MPWeb database and the log on credentials (if you are not using the local MPWeb database).
  • -i: Use to specify the path of the migration toll if you are running the migration tool from a directory other than the one containing the setup.exe file.
  • -e: Use to skip the prompt for choosing the mail profile to use to connect to the Exchange.


Migration Tool Inputs

  • eprofile: The name of the mail profile to use to connect to the Exchange Server.
  • epwd: The password for the eprofile.
  • shost: The SQL Server which stores the notification information.
  • suser: The account name to use to connect to the SQL Server.
  • spwd: The password for the suser.
  • ipath: The path to the new installation executable file.


NOTE: If the Exchange profile information is not entered, the system prompts you to log in. If the SQL Server information is not entered, this tool will attempt to discover it automatically.

Rating: 0.0/5 (0 votes cast)

Personal tools