Cisco Unified MeetingPlace, Release 6.x -- Installing and Upgrading the Audio Server Software

From DocWiki

Revision as of 01:15, 22 January 2008 by MeetingPlace Moderator (Talk | contribs)
Jump to: navigation, search


Contents

Installing Cisco Unified MeetingPlace Audio Server Release 6.0 for the First Time

Audio Server software Release 6.0 is pre-installed on new Cisco Unified MeetingPlace Audio Server systems.


Installing or Upgrading to Cisco Unified MeetingPlace MeetingTime Release 6.0

Use the following procedure to download and decompress the MeetingTime Release 6.0 software from an .iso file.


Procedure
  1. Go to the Cisco Software Center web site at http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml.
  2. In the Cisco Unified MeetingPlace section, click the MeetingTime link.
  3. Download the file for the current version of MeetingTime.
  4. Using any commercially available CD-ROM burner program, burn the ISO image onto a CD. Do not exceed a speed of 8x when burning the image onto the CD.
  5. Confirm that the file SetupMeetingTime<version>.exe was created (on the local disk or optional CD-ROM).


If you do not see the file, contact Cisco Network Consulting Engineering (NCE) for assistance.


For instructions on installing and upgrading MeetingTime, refer to the "Installing MeetingTime" appendix of the Administration Guide for Cisco Unified MeetingPlace Audio Server Release 6.0 at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/prod_maintenance_guides_list.html.



Upgrading to a Maintenance Release of Cisco Unified MeetingPlace Release 6.0

Cisco Unified MeetingPlace Release 6.0.1.11 is also known as Cisco Unified MeetingPlace Release 6.0 maintenance release 1 (MR1).


When upgrading from Cisco Unified MeetingPlace Release 6.0 to a patch release, the maintenance release can be treated as a patch and can be installed using the patch installation procedure.


Before You Begin

Cisco Unified MeetingPlace Audio Server Release 6.0 must be installed on your system before applying the Cisco Unified MeetingPlace Audio Server Release 6.0 MR1 patch to your audio server.


Procedure
  1. Go to the Cisco Software Center web site at http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml.
  2. Download the file for Cisco Unified MeetingPlace Release 6.0 MR1 .
  3. Follow the patch installer procedure at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_tech_note09186a008021d43a.shtml to update your main audio server.
  4. Follow this procedure to update any shadow server.


Primary and Shadow Server Requirements

When updating the Cisco Unified MeetingPlace Audio Server for major, minor, and maintenance releases, if the system has a shadow server, then the shadow server must also be updated before it can connect to the primary server.


For example:

  • If you move from Release 5.4.1.5 to Release 6.0.1.11, you must update the shadow server.
  • If you move from Release 6.0.0.25 to Release 6.0.1.11, you must update the shadow server.
  • If you move from Release 6.0.0.24 to Release 6.0.0.25, you do not have to update the shadow server, but it is recommended.

Rating: 0.0/5 (0 votes cast)

Personal tools