Cisco Unified CCX Engine does not start and an RMI port in use error appears

From DocWiki

Revision as of 18:21, 18 December 2009 by Docwikibot (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Cisco Unified CCX Engine does not start and an RMI port in use error appears

Problem Summary The Cisco Unified CCX Engine does not start and a Remote Method Invocation (RMI) port in use error appears in the Cisco Unified CCX trace files.
Error Message RMI port in use.
Possible Cause Another process is using the port that the Cisco Unified CCX Engine is attempting to use.
Recommended Action

From the Cisco Unified CCX Administration web page, complete the following steps:

  1. Choose System > System Parameters.
  2. Enter a different port in the RMI Port Number field.
  3. Stop and then restart the Cisco Unified CCX Engine.
  4. If Cisco Unified CCX Engine is shown "Invalid" from Cisco Unified CCX Administration, see the troubleshooting tip "Service constantly shows Invalid."
Release Release 7.0(1)
Associated CDETS # None.

Rating: 5.0/5 (1 vote cast)

Personal tools