Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Tools and Methodology - Revision history

Jeffrlee at 22:13, 13 March 2013

2013-03-13T22:13:50Z

← Older revision		Revision as of 22:13, 13 March 2013
Line 5:		Line 5:
	\| align="center" \| '''Guide Contents'''		\| align="center" \| '''Guide Contents'''
	\|-		\|-
-	\| [[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Overview\|Troubleshooting Overview]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Installs, Upgrades, and Reboots\|Troubleshooting Installs, Upgrades, and Reboots]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Licensing\|Troubleshooting Licensing]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting VDCs\|Troubleshooting VDCs]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting CFS\|Troubleshooting CFS]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Ports\|Troubleshooting Ports]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting vPCs\|Troubleshooting vPCs]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting VLANs\|Troubleshooting VLANs]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting STP\|Troubleshooting STP]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Routing\|Troubleshooting Routing]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Unicast Traffic\|Troubleshooting Unicast Traffic]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting WCCP\|Troubleshooting WCCP]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Memory\|Troubleshooting Memory]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Packet Flow Issues\|Troubleshooting Packet Flow Issues]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Before Contacting Technical Support\|Before Contacting Technical Support]]<br>''Troubleshooting Tools and Methodology (this section)''	+	\| [[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Overview\|Troubleshooting Overview]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Installs, Upgrades, and Reboots\|Troubleshooting Installs, Upgrades, and Reboots]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Licensing\|Troubleshooting Licensing]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting VDCs\|Troubleshooting VDCs]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting CFS\|Troubleshooting CFS]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Ports\|Troubleshooting Ports]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting vPCs\|Troubleshooting vPCs]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting VLANs\|Troubleshooting VLANs]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting STP\|Troubleshooting STP]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Routing\|Troubleshooting Routing]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Unicast Traffic\|Troubleshooting Unicast Traffic]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting WCCP\|Troubleshooting WCCP]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Memory\|Troubleshooting Memory]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting Packet Flow Issues\|Troubleshooting Packet Flow Issues]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Troubleshooting FCoE\|Troubleshooting FCoE]]<br>[[Cisco Nexus 7000 Series NX-OS Troubleshooting Guide -- Before Contacting Technical Support\|Before Contacting Technical Support]]<br>''Troubleshooting Tools and Methodology (this section)''
	\|}		\|}

Jeffrlee: /* Using Pong */

2012-08-09T15:19:57Z

Using Pong

← Older revision		Revision as of 15:19, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>    For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>     For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.

Jeffrlee: /* Using Pong */

2012-08-09T15:19:18Z

Using Pong

← Older revision		Revision as of 15:19, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>    For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>    For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.

	<br> Example: Pong command		<br> Example: Pong command

Jeffrlee: /* Using Pong */

2012-08-09T15:18:22Z

Using Pong

← Older revision		Revision as of 15:18, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>    For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>    For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.

	<br> Example: Pong command		<br> Example: Pong command

Jeffrlee: /* Using Pong */

2012-08-09T15:17:46Z

Using Pong

← Older revision		Revision as of 15:17, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>    For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.

	<br> Example: Pong command		<br> Example: Pong command

Jeffrlee: /* Using Pong */

2012-08-09T15:16:55Z

Using Pong

← Older revision		Revision as of 15:16, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.

	<br> Example: Pong command		<br> Example: Pong command

Jeffrlee: /* Using Pong */

2012-08-09T15:15:42Z

Using Pong

← Older revision		Revision as of 15:15, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	~~<br>~~However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-	~~<br>~~However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.

	<br> Example: Pong command		<br> Example: Pong command

Jeffrlee: /* Using Pong */

2012-08-09T15:14:18Z

Using Pong

← Older revision		Revision as of 15:14, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	~~   ~~ However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	<br>However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-	~~   ~~ However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+	<br>However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.

	<br> Example: Pong command		<br> Example: Pong command

Jeffrlee: /* Using Pong */

2012-08-09T15:12:54Z

Using Pong

← Older revision		Revision as of 15:12, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. <br>For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.

Jeffrlee at 15:12, 9 August 2012

2012-08-09T15:12:12Z

← Older revision		Revision as of 15:12, 9 August 2012
Line 100:		Line 100:
	*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.		*On F1 series module ports, priority flow control (PFC) is not supported when the pong utility is enabled in the same VDC.
	*The pong utility is not supported on an access switch using vPC.		*The pong utility is not supported on an access switch using vPC.
-		+	However, the pong utility is supported when using an interface from the access switch to the vPC peer. For example, to configure the pong utility from  the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.
-	However, the pong utility is supported when using an interface from the access switch to the vPC peer. For example, to configure the pong utility from the access switch to the vPC primary, you must provide an interface that is directly connected to the vPC primary.	+

	*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.		*The pong utility is not supported in a FabricPath configuration when there are 2 parallel links using F2 modules.
-		+	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.
-	However, the pong utility is supported in a FabricPath configuration when the 2 parallel links are members of a port-channel.	+

	<br> Example: Pong command		<br> Example: Pong command
Line 336:		Line 334:
	4 18-ef-63-e9-ee-42 (NA) 0 4776		4 18-ef-63-e9-ee-42 (NA) 0 4776
	5 18-ef-63-e9-ee-41 (NA) 0 4816		5 18-ef-63-e9-ee-41 (NA) 0 4816
		+
		+
		+


Line 359:		Line 360:
	4 18-ef-63-e9-ee-42 (NA) 0 4760		4 18-ef-63-e9-ee-42 (NA) 0 4760
	5 18-ef-63-e9-ee-41 (NA) 0 4816		5 18-ef-63-e9-ee-41 (NA) 0 4816
		+
		+
		+


Line 382:		Line 386:
	4 18-ef-63-e9-ee-42 (NA) 0 4792		4 18-ef-63-e9-ee-42 (NA) 0 4792
	5 18-ef-63-e9-ee-41 (NA) 0 4832		5 18-ef-63-e9-ee-41 (NA) 0 4832
		+
		+
		+


Line 405:		Line 412:
	4 18-ef-63-e9-ee-42 (NA) 0 4760		4 18-ef-63-e9-ee-42 (NA) 0 4760
	5 18-ef-63-e9-ee-41 (NA) 0 4784		5 18-ef-63-e9-ee-41 (NA) 0 4784
		+
		+
		+