Cisco MDS SanOS Troubleshooting Guide -- Troubleshooting IVR - Revision history

Pravraj: /* CFS Merge Failed */

2010-11-04T10:44:24Z

CFS Merge Failed

← Older revision		Revision as of 10:44, 4 November 2010
Line 885:		Line 885:
	Maximum number of VSANs or IVR VSAN topology entries reached.		Maximum number of VSANs or IVR VSAN topology entries reached.
	\|		\|
-	Reconfigure your fabric before merging to reduce the number of VSANs or topology entries. See Appendix C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x."~~</span>~~	+	Reconfigure your fabric before merging to reduce the number of VSANs or topology entries. See Appendix C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x."
	\|- align="left" valign="top"		\|- align="left" valign="top"
	\|		\|

Pravraj: /* Locked IVR CFS Session */

2010-11-04T10:43:24Z

Locked IVR CFS Session

← Older revision		Revision as of 10:43, 4 November 2010
Line 836:		Line 836:
	Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR</font>'''</span> and click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the ConfigView As drop-down menu to <span style="font-style: normal">'''<font color="Black">pending</font>'''</span> and verify the pending configuration changes. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> to save these changes, <span style="font-style: normal">'''<font color="Black">abort </font>'''</span>to discard the changes, or <span style="font-style: normal">'''<font color="Black">clear</font>'''</span> to clear the session lock.<span style="font-style: normal">'''<font color="Black"> </font>'''</span>Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.		Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR</font>'''</span> and click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the ConfigView As drop-down menu to <span style="font-style: normal">'''<font color="Black">pending</font>'''</span> and verify the pending configuration changes. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> to save these changes, <span style="font-style: normal">'''<font color="Black">abort </font>'''</span>to discard the changes, or <span style="font-style: normal">'''<font color="Black">clear</font>'''</span> to clear the session lock.<span style="font-style: normal">'''<font color="Black"> </font>'''</span>Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.

-	Use the <span style="font-style: normal">'''<font color="Black">show ivr pending-diff</font>'''</span> CLI command to determine if you have a pending configuration change. Use <span style="font-style: normal">'''<font color="Black">ivr commit </font>'''</span>to commit this change or i<span style="font-style: normal">'''<font color="Black">vr abort</font>'''</span> to discard the changes and free up the session lock. If you do not have pending configuration changes, use the <span style="font-style: normal">'''<font color="Black">clear ivr session</font>'''</span> CLI command to free the session lock.	+	Use the <span style="font-style: normal">'''<font color="Black">show ivr pending-diff</font>'''</span> CLI command to determine if you have a pending configuration change. Use <span style="font-style: normal">'''<font color="Black">ivr commit </font>'''</span>to commit this change or <span style="font-style: normal">'''<font color="Black">ivr abort</font>'''</span> to discard the changes and free up the session lock. If you do not have pending configuration changes, use the <span style="font-style: normal">'''<font color="Black">clear ivr session</font>'''</span> CLI command to free the session lock.
	\|}		\|}

Pravraj: /* Traffic Does Not Traverse IVR Path */

2010-11-04T10:42:12Z

Traffic Does Not Traverse IVR Path

← Older revision		Revision as of 10:42, 4 November 2010
Line 659:		Line 659:
	Fabric includes an SN5428 or MDS 9020 switch and you have not added the IVR virtual domains to the remote VSAN domain lists.		Fabric includes an SN5428 or MDS 9020 switch and you have not added the IVR virtual domains to the remote VSAN domain lists.
	\|		\|
-	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and click the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager.Fill in the Create Virtual Domains for VSAN field and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> Click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab, and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span>, and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span>	+	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and click the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager. Fill in the Create Virtual Domains for VSAN field and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> Click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab, and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span>, and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span>

-	Use the i<span style="font-style: normal">'''<font color="Black">vr virtual-fcdomain-add vsan-ranges </font>'''</span>CLI command to add existing and future virtual domains to the domain list for the selected VSANs.	+	Use the <span style="font-style: normal">'''<font color="Black">ivr virtual-fcdomain-add vsan-ranges </font>'''</span>CLI command to add existing and future virtual domains to the domain list for the selected VSANs.

	Repeat this on all edge VSANs.		Repeat this on all edge VSANs.
Line 673:		Line 673:
	Devices are in different IVR service groups.		Devices are in different IVR service groups.
	\|		\|
-	Verify the IVR service groups. Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR ~~and~~</font>'''</span> click the <span style="font-style: normal">'''<font color="Black">Service Group</font>'''</span> tab in Fabric Manager.	+	Verify the IVR service groups. Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span> and click the <span style="font-style: normal">'''<font color="Black">Service Group</font>'''</span> tab in Fabric Manager.

	Use the <span style="font-style: normal">'''<font color="Black">show ivr service-group</font>'''</span> CLI command.		Use the <span style="font-style: normal">'''<font color="Black">show ivr service-group</font>'''</span> CLI command.

Pravraj: /* Limitations and Restrictions */

2010-11-04T10:40:21Z

Limitations and Restrictions

← Older revision		Revision as of 10:40, 4 November 2010
Line 65:		Line 65:
	* You cannot run SANTap and IVR together. IVR and SANTap both perform straddling across VSANs and cannot be used together.		* You cannot run SANTap and IVR together. IVR and SANTap both perform straddling across VSANs and cannot be used together.

-	~~'''~~Table 13-1~~'''~~ describes the configuration limits for IVR. (See Appendix C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x" for complete limitations to the IVR configuration based on the Cisco SAN-OS release.)	+	Table 13-1 describes the configuration limits for IVR. (See Appendix C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x" for complete limitations to the IVR configuration based on the Cisco SAN-OS release.)

	<div align="left">		<div align="left">

Pravraj: /* Troubleshooting the IVR Wizard */

2010-09-24T09:12:34Z

Troubleshooting the IVR Wizard

← Older revision		Revision as of 09:12, 24 September 2010
Line 904:		Line 904:
	== Troubleshooting the IVR Wizard ==		== Troubleshooting the IVR Wizard ==

-	The IVR wizard in Fabric Manager simplifies the process of configuring IVR across your fabric. The IVR wizard automatically checks for the appropriate Cisco SAN-OS version across the switches in the VSAN and determines which IVR features the switches are capable of. (See ~~'''~~Table 13-1~~'''~~.)	+	The IVR wizard in Fabric Manager simplifies the process of configuring IVR across your fabric. The IVR wizard automatically checks for the appropriate Cisco SAN-OS version across the switches in the VSAN and determines which IVR features the switches are capable of. (See Table 13-1.)

	This section describes the following warning or error dialog boxes that display when you configure IVR using the Fabric Manager IVR wizard:		This section describes the following warning or error dialog boxes that display when you configure IVR using the Fabric Manager IVR wizard:
Line 912:		Line 912:
	* Error: Fabric Is Changing. Please Retry the Request Later		* Error: Fabric Is Changing. Please Retry the Request Later

-	=== Warning: Not All Switches ~~Are~~ IVR NAT Capable or ~~Are~~ Unmanageable ===	+	=== Warning: Not All Switches are IVR NAT Capable or are Unmanageable ===

	'''Symptom''' Warning: Not all switches are IVR NAT capable or are unmanageable.		'''Symptom''' Warning: Not all switches are IVR NAT capable or are unmanageable.
Line 919:		Line 919:

	{\| id="wp46004table46002" width="80%" border="1" cellpadding="3"		{\| id="wp46004table46002" width="80%" border="1" cellpadding="3"
-	\|+ '''Table 13-15 Not All Switches ~~Are~~ IVR NAT Capable or ~~Are~~ Unmanageable'''	+	\|+ '''Table 13-15 Not All Switches are IVR NAT Capable or are Unmanageable'''
	\|- align="left" valign="bottom"		\|- align="left" valign="bottom"
	! scope="col" \|		! scope="col" \|
Line 933:		Line 933:
	One or more switches in the fabric are not running Cisco MDS SAN-OS Release 2.1(1a) or later.		One or more switches in the fabric are not running Cisco MDS SAN-OS Release 2.1(1a) or later.
	\|		\|
-	Upgrade to the Cisco SAN-OS release required for the IVR features you want to use. See ~~'''~~Table 13-1~~'''~~ and ~~'''~~Chapter 2, "Troubleshooting Installs, Upgrades, and Reboots."~~'''~~	+	Upgrade to the Cisco SAN-OS release required for the IVR features you want to use. See Table 13-1 and Chapter 2, "Troubleshooting Installs, Upgrades, and Reboots."
	\|- align="left" valign="top"		\|- align="left" valign="top"
	\|		\|
Line 997:		Line 997:
	A separate IVR configuration change that was not committed.		A separate IVR configuration change that was not committed.
	\|		\|
-	IVR has pending changes that were not committed. Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANS > IVR</font>'''</span> and ~~select~~ the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the View Config As drop-down menu to <span style="font-style: normal">'''<font color="Black">pending</font>'''</span> and verify the pending configuration changes. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> to save these changes or <span style="font-style: normal">'''<font color="Black">abort </font>'''</span>to discard the changes<span style="font-style: normal">'''<font color="Black">. </font>'''</span>Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.	+	IVR has pending changes that were not committed. Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANS > IVR</font>'''</span> and click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the View Config As drop-down menu to <span style="font-style: normal">'''<font color="Black">pending</font>'''</span> and verify the pending configuration changes. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> to save these changes or <span style="font-style: normal">'''<font color="Black">abort </font>'''</span>to discard the changes<span style="font-style: normal">'''<font color="Black">. </font>'''</span>Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.
	\|- align="left" valign="top"		\|- align="left" valign="top"
	\|		\|
	The IVR CFS session was not unlocked after the last commit.		The IVR CFS session was not unlocked after the last commit.
	\|		\|
-	Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANS > IVR</font>'''</span> and ~~select~~ the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">clear</font>'''</span> to remove the session lock. Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.	+	Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANS > IVR</font>'''</span> and click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">clear</font>'''</span> to remove the session lock. Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.
	\|}		\|}

Pravraj: /* CFS Merge Failed */

2010-09-24T09:10:22Z

CFS Merge Failed

← Older revision		Revision as of 09:10, 24 September 2010
Line 847:		Line 847:
	If a CFS merge fails, you may see the following system messages:		If a CFS merge fails, you may see the following system messages:

-	:'''Error Message''' IVR-2-CFS_PEER_LOST_WITHIN_SESSION: CFS peer with switch wwn [chars]was lost in the middle of an active CFS session. Abort the CFS session and ~~re-enter~~ the configuration changes.	+	:'''Error Message''' IVR-2-CFS_PEER_LOST_WITHIN_SESSION: CFS peer with switch wwn [chars]was lost in the middle of an active CFS session. Abort the CFS session and reenter the configuration changes.
-	::'''Explanation''' Due to port flaps (enable and disable of the VSAN), link outages, switch restarts and so on, a CFS peer switch of IVR was lost. The current configuration changes ~~would~~ not be applied to this peer until the peer merges with this switch. The CFS merge ~~may~~ fail if the configuration at the lost peer conflicts with the changes made in this session. Also, IVR auto topology could be out of sync. with this peer. We recommend that you discard this CFS session using ivr abort command and then ~~re-enter~~ the configuration changes. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method.	+	::'''Explanation''' Due to port flaps (enable and disable of the VSAN), link outages, switch restarts and so on, a CFS peer switch of IVR was lost. The current configuration changes will not be applied to this peer until the peer merges with this switch. The CFS merge can fail if the configuration at the lost peer conflicts with the changes made in this session. Also, IVR auto topology could be out of sync with this peer. We recommend that you discard this CFS session using the '''ivr abort''' command and then reenter the configuration changes. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method.
	::'''Recommended Action''' No action is required.		::'''Recommended Action''' No action is required.
-	::~~Introduced~~ Cisco MDS SAN-OS Release 2.0(1b).	+	:: This message is introduced in Cisco MDS SAN-OS Release 2.0(1b).


Line 856:		Line 856:
	::'''Explanation''' An error occurred while merging the configuration. The reason for the failure is shown in the error message.		::'''Explanation''' An error occurred while merging the configuration. The reason for the failure is shown in the error message.
	::'''Recommended Action''' If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.		::'''Recommended Action''' If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
-	:: ~~Introduced~~ Cisco MDS SAN-OS Release 2.0(1b).	+	:: This message is introduced in Cisco MDS SAN-OS Release 2.0(1b).


Line 878:		Line 878:
	IVR topology incorrect.		IVR topology incorrect.
	\|		\|
-	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and ~~select~~ the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager. Check the <span style="font-style: normal">'''<font color="Black">Auto Discover Topology</font>'''</span> check box and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> ~~Select~~ the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> and click <span style="font-style: normal">'''<font color="Black">Apply Changes. </font>'''</span>	+	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and click the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager. Check the <span style="font-style: normal">'''<font color="Black">Auto Discover Topology</font>'''</span> check box and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> Click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> and click <span style="font-style: normal">'''<font color="Black">Apply Changes. </font>'''</span>

-	~~Or use~~ either the<span style="font-style: normal">'''<font color="Black"> ivr vsan topology auto </font>'''</span>CLI command to automatically reconfigure the IVR topology, or the<span style="font-style: normal">'''<font color="Black"> ivr vsan topology database</font>'''</span> CLI command to manually reconfigure the IVR topology.	+	Use either the<span style="font-style: normal">'''<font color="Black"> ivr vsan topology auto </font>'''</span>CLI command to automatically reconfigure the IVR topology, or the<span style="font-style: normal">'''<font color="Black"> ivr vsan topology database</font>'''</span> CLI command to manually reconfigure the IVR topology.
	\|- align="left" valign="top"		\|- align="left" valign="top"
	\|		\|
	Maximum number of VSANs or IVR VSAN topology entries reached.		Maximum number of VSANs or IVR VSAN topology entries reached.
	\|		\|
-	Reconfigure your fabric before merging to reduce the number of VSANs or topology entries. See ~~[ts_appc.html#wpxref14091 <span class="cXRef_Color" style="font-weight: normal">AppendixÂ~~ C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x."</span>]	+	Reconfigure your fabric before merging to reduce the number of VSANs or topology entries. See Appendix C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x."</span>
	\|- align="left" valign="top"		\|- align="left" valign="top"
	\|		\|
Line 895:		Line 895:
	Conflicting user-configured IVR VSAN topology database entries.		Conflicting user-configured IVR VSAN topology database entries.
	\|		\|
-	Enable IVR auto topology on both fabrics before the merge and remove any user-configured IVR VSAN topology database entries.	+	Enable IVR auto-topology on both fabrics before the merge and remove any user-configured IVR VSAN topology database entries.
	\|}		\|}

	</div>		</div>

-	<br />	+	<br/>

	== Troubleshooting the IVR Wizard ==		== Troubleshooting the IVR Wizard ==

Pravraj: /* Locked IVR CFS Session */

2010-09-24T09:04:35Z

Locked IVR CFS Session

← Older revision		Revision as of 09:04, 24 September 2010
Line 834:		Line 834:
	CFS did not give up the session lock for IVR after the last commit or an IVR configuration change is pending and has not been committed.		CFS did not give up the session lock for IVR after the last commit or an IVR configuration change is pending and has not been committed.
	\|		\|
-	Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR</font>'''</span> and ~~select~~ the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the ConfigView As drop-down menu to <span style="font-style: normal">'''<font color="Black">pending</font>'''</span> and verify the pending configuration changes. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> to save these changes, <span style="font-style: normal">'''<font color="Black">abort </font>'''</span>to discard the changes, or <span style="font-style: normal">'''<font color="Black">clear</font>'''</span> to clear the session lock.<span style="font-style: normal">'''<font color="Black"> </font>'''</span>Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.	+	Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR</font>'''</span> and click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab in Fabric Manager. Set the ConfigView As drop-down menu to <span style="font-style: normal">'''<font color="Black">pending</font>'''</span> and verify the pending configuration changes. Set the ConfigAction drop-down menu to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span> to save these changes, <span style="font-style: normal">'''<font color="Black">abort </font>'''</span>to discard the changes, or <span style="font-style: normal">'''<font color="Black">clear</font>'''</span> to clear the session lock.<span style="font-style: normal">'''<font color="Black"> </font>'''</span>Click <span style="font-style: normal">'''<font color="Black">Apply Changes</font>'''</span>.

-	~~Or use~~ the <span style="font-style: normal">'''<font color="Black">show ivr pending-diff</font>'''</span> CLI command to determine if you have a pending configuration change. Use <span style="font-style: normal">'''<font color="Black">ivr commit </font>'''</span>to commit this change or i<span style="font-style: normal">'''<font color="Black">vr abort</font>'''</span> to discard the changes and free up the session lock. If you do not have pending configuration changes, use the <span style="font-style: normal">'''<font color="Black">clear ivr session</font>'''</span> CLI command to free the session lock.	+	Use the <span style="font-style: normal">'''<font color="Black">show ivr pending-diff</font>'''</span> CLI command to determine if you have a pending configuration change. Use <span style="font-style: normal">'''<font color="Black">ivr commit </font>'''</span>to commit this change or i<span style="font-style: normal">'''<font color="Black">vr abort</font>'''</span> to discard the changes and free up the session lock. If you do not have pending configuration changes, use the <span style="font-style: normal">'''<font color="Black">clear ivr session</font>'''</span> CLI command to free the session lock.
	\|}		\|}

Pravraj: /* LUN Configuration Failure in IVR Zoning */

2010-09-24T09:01:27Z

LUN Configuration Failure in IVR Zoning

← Older revision		Revision as of 09:01, 24 September 2010
Line 776:		Line 776:
	One or more switches in the VSAN are not running Cisco MDS SAN-OS Release 2.1(1a) or later.		One or more switches in the VSAN are not running Cisco MDS SAN-OS Release 2.1(1a) or later.
	\|		\|
-	Upgrade to the Cisco SAN-OS release required for the IVR features you want to use. See ~~'''~~Table 13-1~~'''~~ and ~~'''~~Chapter 2, "Troubleshooting Installs, Upgrades, and Reboots."~~'''~~	+	Upgrade to the Cisco SAN-OS release required for the IVR features you want to use. See Table 13-1 and Chapter 2, "Troubleshooting Installs, Upgrades, and Reboots."
	\|}		\|}

Pravraj: /* Link Isolated */

2010-09-24T09:00:46Z

Link Isolated

← Older revision		Revision as of 09:00, 24 September 2010
Line 709:		Line 709:
	Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > Domain Manager</font>'''</span> in Fabric Manager to verify a domain overlap.		Choose <span style="font-style: normal">'''<font color="Black">Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > Domain Manager</font>'''</span> in Fabric Manager to verify a domain overlap.

-	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and ~~select~~ the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager.Fill in the Create Virtual Domains for VSAN field and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> ~~Select~~ the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit, </font>'''</span>and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span>	+	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and click the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager.Fill in the Create Virtual Domains for VSAN field and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> Click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit, </font>'''</span>and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span>

-	~~Or use~~ the<span style="font-style: normal">'''<font color="Black"> show fcdomain domain-list</font>'''</span> CLI command to verify a domain overlap. Use the <span style="font-style: normal">'''<font color="Black">ivr widthdraw domain</font>'''</span> CLI command to remove the overlapped domain. Use persistent FC IDs to reassign the overlapped domain. Use the i<span style="font-style: normal">'''<font color="Black">vr virtual-fcdomain-add vsan-ranges </font>'''</span>CLI command to add existing and future virtual domains to the domain list for the selected VSANs.	+	Use the<span style="font-style: normal">'''<font color="Black"> show fcdomain domain-list</font>'''</span> CLI command to verify a domain overlap. Use the <span style="font-style: normal">'''<font color="Black">ivr widthdraw domain</font>'''</span> CLI command to remove the overlapped domain. Use persistent FC IDs to reassign the overlapped domain. Use the i<span style="font-style: normal">'''<font color="Black">vr virtual-fcdomain-add vsan-ranges </font>'''</span>CLI command to add existing and future virtual domains to the domain list for the selected VSANs.

	Repeat this on all edge VSANs.		Repeat this on all edge VSANs.
Line 718:		Line 718:
	Internal message payload uses destination ID.		Internal message payload uses destination ID.
	\|		\|
-	See the ~~'''~~"IVR Network Address Translation Fails"~~'''~~ section.	+	See the "IVR Network Address Translation Fails" section.
	\|}		\|}

Pravraj: /* Traffic Does Not Traverse IVR Path */

2010-09-24T08:59:15Z

Traffic Does Not Traverse IVR Path

← Older revision		Revision as of 08:59, 24 September 2010
Line 659:		Line 659:
	Fabric includes an SN5428 or MDS 9020 switch and you have not added the IVR virtual domains to the remote VSAN domain lists.		Fabric includes an SN5428 or MDS 9020 switch and you have not added the IVR virtual domains to the remote VSAN domain lists.
	\|		\|
-	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and ~~select~~ the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager.Fill in the Create Virtual Domains for VSAN field and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> ~~Select~~ the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab, and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span>, and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span>	+	Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and click the <span style="font-style: normal">'''<font color="Black">Action</font>'''</span> tab in Fabric Manager.Fill in the Create Virtual Domains for VSAN field and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span> Click the <span style="font-style: normal">'''<font color="Black">CFS</font>'''</span> tab, and set ConfigAction to <span style="font-style: normal">'''<font color="Black">commit</font>'''</span>, and click <span style="font-style: normal">'''<font color="Black">Apply Changes.</font>'''</span>

-	~~Or use~~ the i<span style="font-style: normal">'''<font color="Black">vr virtual-fcdomain-add vsan-ranges </font>'''</span>CLI command to add existing and future virtual domains to the domain list for the selected VSANs.	+	Use the i<span style="font-style: normal">'''<font color="Black">vr virtual-fcdomain-add vsan-ranges </font>'''</span>CLI command to add existing and future virtual domains to the domain list for the selected VSANs.

	Repeat this on all edge VSANs.		Repeat this on all edge VSANs.
Line 668:		Line 668:
	Internal message payload uses destination ID.		Internal message payload uses destination ID.
	\|		\|
-	See the ~~'''~~"IVR Network Address Translation Fails"~~'''~~ section.	+	See the "IVR Network Address Translation Fails" section.
	\|- align="left" valign="top"		\|- align="left" valign="top"
	\|		\|
	Devices are in different IVR service groups.		Devices are in different IVR service groups.
	\|		\|
-	Verify the IVR service groups. Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR and</font>'''</span> ~~select~~ the <span style="font-style: normal">'''<font color="Black">Service Group</font>'''</span> tab in Fabric Manager.	+	Verify the IVR service groups. Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR and</font>'''</span> click the <span style="font-style: normal">'''<font color="Black">Service Group</font>'''</span> tab in Fabric Manager.

-	~~Or use~~ the <span style="font-style: normal">'''<font color="Black">show ivr service-group</font>'''</span> CLI command.	+	Use the <span style="font-style: normal">'''<font color="Black">show ivr service-group</font>'''</span> CLI command.

-	Move the VSANs into the same IVR service group. Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and ~~select~~ the <span style="font-style: normal">'''<font color="Black">Service Group</font>'''</span> tab in Fabric Manager.	+	Move the VSANs into the same IVR service group. Choose<span style="font-style: normal">'''<font color="Black"> Fabric</font>'''</span><span>'''''<font color="Black">xx</font>'''''</span><span style="font-style: normal">'''<font color="Black"> > All VSANs > IVR </font>'''</span>and click the <span style="font-style: normal">'''<font color="Black">Service Group</font>'''</span> tab in Fabric Manager.

-	~~Or use the <span style="font-style: normal">'''<font color="Black">ivr service-group </font>'''</span>CLI command.~~ Use the<span style="font-style: normal">'''<font color="Black"> ivr service-group activate </font>'''</span>CLI command to activate this change. If CFS is enabled, use the <span style="font-style: normal">'''<font color="Black">ivr commit</font>'''</span> CLI command to commit this change.	+	Use the<span style="font-style: normal">'''<font color="Black"> ivr service-group activate </font>'''</span>CLI command to activate this change. If CFS is enabled, use the <span style="font-style: normal">'''<font color="Black">ivr commit</font>'''</span> CLI command to commit this change.
	\|}		\|}