Cisco MDS SanOS Troubleshooting Guide -- Troubleshooting Distributed Device Alias Services

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(New page: {{Template:Required Metadata}} This section describes how to troubleshoot and resolve problems that might occur when using device aliases. __TOC__ ==Overview== ==Initial Troubleshooting C...)
Line 4: Line 4:
__TOC__
__TOC__
==Overview==
==Overview==
 +
When you configure different features for a Cisco MDS 9000 Family switch, such as zoning, DPVM, or port security, you must specify the correct device name each time. An inaccurate device name can cause unexpected results. You can circumvent this problem by defining and using device aliases.
 +
 +
A device alias is a user-friendly name for a port WWN (pWWN) that can be used in all configuration commands as required. All switches in the Cisco MDS 9000 Family support Distributed Device Alias Services (device aliases).
 +
==Initial Troubleshooting Checklist==
==Initial Troubleshooting Checklist==
 +
Device alias problems may result in merge, commit, or validation failures, and resolution requires gathering information about the specific failure and the fabric configuration. Begin troubleshooting device alias issues by checking the following items:
 +
 +
<table border="1" cellpadding="3" cellspacing="0" width="80%" bordercolor="#808080"
 +
id="wp78756table78754">
 +
  <tr align="left" valign="bottom">    <th scope="col">
 +
Checklist
 +
</th>
 +
    <th scope="col">
 +
Check off
 +
</th>
 +
</tr>
 +
  <tr align="left" valign="top"><td><p class="pB1_Body1">
 +
Verify the device alias mode (basic or enhanced).
 +
</p>
 +
</td>
 +
<td><p class="pB1_Body1">
 +
</p>
 +
</td>
 +
</tr>
 +
  <tr align="left" valign="top"><td><p class="pB1_Body1">
 +
Verify that device alias distribution is enabled.
 +
</p>
 +
</td>
 +
<td><p class="pB1_Body1">
 +
</p>
 +
</td>
 +
</tr>
 +
  <tr align="left" valign="top"><td><p class="pB1_Body1">
 +
Verify that the fabric is not locked.
 +
</p>
 +
</td>
 +
<td><p class="pB1_Body1">
 +
</p>
 +
</td>
 +
</tr>
 +
</table>
 +
===Merge Failure Messages===
===Merge Failure Messages===
===Merge Validation Failure Messages===
===Merge Validation Failure Messages===

Revision as of 04:56, 27 July 2010

This section describes how to troubleshoot and resolve problems that might occur when using device aliases.

Contents

Overview

When you configure different features for a Cisco MDS 9000 Family switch, such as zoning, DPVM, or port security, you must specify the correct device name each time. An inaccurate device name can cause unexpected results. You can circumvent this problem by defining and using device aliases.

A device alias is a user-friendly name for a port WWN (pWWN) that can be used in all configuration commands as required. All switches in the Cisco MDS 9000 Family support Distributed Device Alias Services (device aliases).

Initial Troubleshooting Checklist

Device alias problems may result in merge, commit, or validation failures, and resolution requires gathering information about the specific failure and the fabric configuration. Begin troubleshooting device alias issues by checking the following items:

Checklist

Check off

Verify the device alias mode (basic or enhanced).

Verify that device alias distribution is enabled.

Verify that the fabric is not locked.

Merge Failure Messages

Merge Validation Failure Messages

Commit Failure Messages

Verifying Device Alias Database Status Using the CLI

Limitations and Restrictions

Merge Failure Issues

Resolving Duplicate Device Alias Names

Resolving Mapping a pWWN to Different Device Alias Names

Resolving Mode Mismatch

Resolving Merge Failures in Mixed Fabric

Resolving a Validation Failure

Resolving Merge in Progress Issues

Validation and Commit Failure Issues

Resolving Database Conflicts

Resolving Application Busy Situations

Resolving Database Size Issues

Resolving Mode Issues

Rating: 0.0/5 (0 votes cast)

Personal tools