Cisco IP Transfer Point with GTT Application Group Overflow Load Sharing Configuration Example

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Related Information)
m (Introduction)
 
(9 intermediate revisions not shown)
Line 1: Line 1:
-
 
-
 
-
 
-
 
-
 
-
 
-
 
-
 
-
 
-
 
-
 
-
 
-
 
==Introduction==
==Introduction==
-
This configuration allows the Cisco ITP to send a user defined amount of traffic to a primary destination. Excess traffic is then sent to a secondary destination. This distribution is more specific than those based on congestion. Overflow load sharing is especially useful for enforcing customer limitations.
+
This configuration allows the Cisco IP Transfer Point (ITP) to send a user defined amount of traffic to a primary destination. Excess traffic is then sent to a secondary destination. This distribution is more specific than those based on congestion. Overflow load sharing is especially useful for enforcing customer limitations.
==Configuration==
==Configuration==
Line 39: Line 26:
<font size = "1"> pc 1.1.2 ssn 11  2  pcssn</font>'''  
<font size = "1"> pc 1.1.2 ssn 11  2  pcssn</font>'''  
-
In the following example, the application group SMS-peak-on-weekdays. It has a primary AS named weekday is limited to a rate of 2000 MSU per second. Any overflow traffic is sent to the backup AS named weekend. The primary AS is defined by the lower cost of 1. The AS is defined by the higher cost of 2.
+
In the following example, the application group is named SMS-peak-on-weekdays. It has a primary AS named weekday and is limited to a rate of 2000 MSU per second. Any overflow traffic is sent to the backup AS named weekend. The primary AS is defined by the lower cost of 1. The AS is defined by the higher cost of 2.
<font size = "1">cs7 gtt application-group SMS-peak-on-weekdays</font>
<font size = "1">cs7 gtt application-group SMS-peak-on-weekdays</font>
Line 67: Line 54:
==Related Information==
==Related Information==
-
[http://www.cisco.com/web/psa/products/index.html Technical Support & Documentation - Cisco Systems]
+
[http://www.cisco.com/en/US/products/sw/wirelssw/ps1862/products_feature_guides_list.html Cisco IP Transfer Point Feature Guides - Cisco Systems]
-
 
+
-
[http://www.cisco.com/en/US/products/sw/wirelssw/ps1862/products_feature_guides_list.html Cisco IP Transfer Point
+
-
Feature Guides]
+
-
Cisco IP Transfer Point Feature Guides
+
-
 
+
-
<!--List links to related information-->
+
-
 
+
-
<!--Add appropriate categories-->
+

Latest revision as of 13:56, 17 June 2010


Contents

Introduction

This configuration allows the Cisco IP Transfer Point (ITP) to send a user defined amount of traffic to a primary destination. Excess traffic is then sent to a secondary destination. This distribution is more specific than those based on congestion. Overflow load sharing is especially useful for enforcing customer limitations.

Configuration

Restrictions and Considerations

  • Only one rate limit entry is allowed for a GTT application group.
  • You configure the rate limit entry for a specific destination in the GTT application group.
  • You must configure both a primary and secondary (backup).
  • You can define the primary and secondary by configuring ASs, DPCs, or any combination of an AS and DPC.
  • The primary AS or DPC is defined as the one with the lowest configured cost.

Example

In the following example, the application group named SMS-peak-on-weekdays has a primary DPC with a point code of 1.1.1. It is limited to a rate of 2000 MSU per second. Any overflow traffic is sent to the backup DPC with a point code of 1.1.2. The primary DPC is defined by the lower cost of 1. The backup is defined by the higher cost of 2.

cs7 gtt application-group SMS-peak-on-weekdays

multiplicity cost

pc 1.1.1 ssn 11 1 pcssn limit 2000

pc 1.1.2 ssn 11 2 pcssn

In the following example, the application group is named SMS-peak-on-weekdays. It has a primary AS named weekday and is limited to a rate of 2000 MSU per second. Any overflow traffic is sent to the backup AS named weekend. The primary AS is defined by the lower cost of 1. The AS is defined by the higher cost of 2.

cs7 gtt application-group SMS-peak-on-weekdays

multiplicity cost

asname weekday 1 gt limit 2000

asname weekend 2 gt

Related show Commands

This section provides information you can use to confirm your configuration is working properly.

Router# show cs7 {instance instance} id rate-limit {pc pc | asname as-name}

Displays the rate limit status of MTP overflow loadshare through the GTT application group.

Router# show cs7 instance id gtt application-group name application-group-name rate-limit

Displays the rate limit status of each line card for GTT SCCP loadshare overflow.


Certain show commands are supported by the Output Interpreter Tool (registered customers only), which allows you to view an analysis of show command output.


Related Information

Cisco IP Transfer Point Feature Guides - Cisco Systems

Rating: 0.0/5 (0 votes cast)

Personal tools