Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting - Revision history

Pzimmerm: added metadata

2012-10-16T17:06:29Z

added metadata

← Older revision		Revision as of 17:06, 16 October 2012
Line 1:		Line 1:
	{{Template:Required Metadata}}		{{Template:Required Metadata}}
		+	<meta name="keywords" content="t1, e1, voice, IOS, troubleshooting"></meta>

	{\| align="right" border="1"		{\| align="right" border="1"

Pzimmerm: /* Figure: RJ-45 Pin Numbering */

2011-12-02T18:43:30Z

Figure: RJ-45 Pin Numbering

← Older revision		Revision as of 18:43, 2 December 2011
Line 151:		Line 151:

	[[Image:H2936.jpg]]		[[Image:H2936.jpg]]
-	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\| Using the Cisco 2524-2525 Back-to-Back] document.	+	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\| Using the Cisco 2524-2525 Back-to-Back] document. Additionally, you can try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Pin Location\|Figure: Pin Location]].
-		+
-	~~: You~~ can ~~also~~ try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: ~~Rollover Cable~~\|Figure: Pin Location]].	+

	===== Figure: Pin Location=====		===== Figure: Pin Location=====

Pzimmerm: /* Figure: RJ-45 Pin Numbering */

2011-12-02T18:41:53Z

Figure: RJ-45 Pin Numbering

← Older revision		Revision as of 18:41, 2 December 2011
Line 153:		Line 153:
	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\| Using the Cisco 2524-2525 Back-to-Back] document.		* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\| Using the Cisco 2524-2525 Back-to-Back] document.

-	You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].	+	: You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].

	===== Figure: Pin Location=====		===== Figure: Pin Location=====

Pzimmerm: /* Figure: RJ-45 Pin Numbering */

2011-12-02T18:34:12Z

Figure: RJ-45 Pin Numbering

← Older revision		Revision as of 18:34, 2 December 2011
Line 151:		Line 151:

	[[Image:H2936.jpg]]		[[Image:H2936.jpg]]
-	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\|Using the Cisco 2524-2525 Back-to-Back] document.	+	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\| Using the Cisco 2524-2525 Back-to-Back] document.

	You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].		You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].

Pzimmerm: /* Figure: RJ-45 Pin Numbering */

2011-12-02T18:32:45Z

Figure: RJ-45 Pin Numbering

← Older revision		Revision as of 18:32, 2 December 2011
Line 151:		Line 151:

	[[Image:H2936.jpg]]		[[Image:H2936.jpg]]
-	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [[http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\|Using the Cisco 2524-2525 Back-to-Back]] document.	+	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\|Using the Cisco 2524-2525 Back-to-Back] document.

	You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].		You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].

Pzimmerm: /* Figure: RJ-45 Pin Numbering */ added link to crossover pinouts

2011-12-02T18:32:24Z

Figure: RJ-45 Pin Numbering: added link to crossover pinouts

← Older revision		Revision as of 18:32, 2 December 2011
Line 151:		Line 151:

	[[Image:H2936.jpg]]		[[Image:H2936.jpg]]
-	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].	+	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. Crossover cable pinouts are shown in the [[http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml#topic1\|Using the Cisco 2524-2525 Back-to-Back]] document.
		+
		+	You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].

	===== Figure: Pin Location=====		===== Figure: Pin Location=====

Pzimmerm: /* Figure: RJ-45 Pin Numbering */ fixed issue with crossover cable.

2011-12-02T18:27:45Z

Figure: RJ-45 Pin Numbering: fixed issue with crossover cable.

← Older revision		Revision as of 18:27, 2 December 2011
Line 151:		Line 151:

	[[Image:H2936.jpg]]		[[Image:H2936.jpg]]
-	* If you have completed all of the steps above and you are still experiencing problems, try using a ~~rollover~~ cable. A rollover cable is shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].	+	* If you have completed all of the steps above and you are still experiencing problems, try using a crossover cable. You can also try a rollover cable to check if the T1/E1 is passing through a reverse-wired wiring path. Pin locations are shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].

	===== Figure: Pin Location=====		===== Figure: Pin Location=====

Pzimmerm: /* Figure: RJ-45 Pin Numbering */ changed title

2011-12-02T18:25:28Z

Figure: RJ-45 Pin Numbering: changed title

← Older revision		Revision as of 18:25, 2 December 2011
Line 151:		Line 151:

	[[Image:H2936.jpg]]		[[Image:H2936.jpg]]
-	* If you have completed all of the steps above and you are still experiencing problems, try using a rollover cable. A rollover cable is shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: ~~Rollover Cable~~]].	+	* If you have completed all of the steps above and you are still experiencing problems, try using a rollover cable. A rollover cable is shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Pin Location]].

	===== Figure: Pin Location=====		===== Figure: Pin Location=====

Pzimmerm: /* Figure: Rollover Cable */ Changed title

2011-12-02T18:24:05Z

Figure: Rollover Cable: Changed title

← Older revision		Revision as of 18:24, 2 December 2011
Line 153:		Line 153:
	* If you have completed all of the steps above and you are still experiencing problems, try using a rollover cable. A rollover cable is shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Rollover Cable]].		* If you have completed all of the steps above and you are still experiencing problems, try using a rollover cable. A rollover cable is shown in [[Cisco IOS Voice Troubleshooting and Monitoring -- T1 or E1 Interface Troubleshooting#Figure: Rollover Cable\|Figure: Rollover Cable]].

-	===== Figure: ~~Rollover Cable~~=====	+	===== Figure: Pin Location=====

	[[Image:h3824.jpg]]		[[Image:h3824.jpg]]

Pzimmerm: Added required metadata template

2009-12-17T23:46:29Z

Added required metadata template

← Older revision		Revision as of 23:46, 17 December 2009
Line 1:		Line 1:
		+	{{Template:Required Metadata}}
		+
	{\| align="right" border="1"		{\| align="right" border="1"
	\|align="center"\|'''Guide Contents'''		\|align="center"\|'''Guide Contents'''