Cisco IOS Voice Troubleshooting and Monitoring -- Enhanced Billing Support for SIP Gateways Troubleshooting
Revision as of 17:27, 16 October 2012 by Pzimmerm
To troubleshoot the Enhanced Billing Support for SIP Gateways feature, perform the following steps:
- Make sure that you can make a voice call.
- Use the debug ccsip all command to enable all SIP debugging capabilities, or use one of the following SIP debug commands:
- debug ccsip calls
- debug ccsip error
- debug ccsip events
- debug ccsip messages
- In addition, debug ccsip events and debug ccsip all include new output specific to the Enhanced Billing Support for SIP Gateways feature. The example shows how the Proxy-Authorization header is broken down into a decoded user name and password.
CCSIP SPI: SIP Call Events tracing is enabled 21:03:21: sippmh_parse_proxy_auth: Challenge is 'Basic'. 21:03:21: sippmh_parse_proxy_auth: Base64 user-pass string is 'MTIzNDU2Nzg5MDEyMzQ1Njou'. 21:03:21: sip_process_proxy_auth: Decoded user-pass string is '1234567890123456:.'. 21:03:21: sip_process_proxy_auth: Username is '1234567890123456'. 21:03:21: sip_process_proxy_auth: Pass is '.'. 21:03:21: sipSPIAddBillingInfoToCcb: sipCallId for billing records = 10872472-173611CC-81E9C73D-F836C2B6@172.18.192.19421:03:21: ****Adding to UAS Request table