Cisco Configuration Engine -- Troubleshooting Installation Checks

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(New page: ==Troubleshooting Installation Checks== This section describes the installation checks performed by ce_install.sh and ce_check.sh scripts. To troubleshoot by using the installation checks...)
Line 15: Line 15:
The install and check install script validates the OS, CPU speed, RAM, and disk space usage to ensure that the configuration requirements are sufficient to install the Cisco Configuration Engine. The example below shows that the minimum RAM requirement is not meet within Cisco Configuration Engine.
The install and check install script validates the OS, CPU speed, RAM, and disk space usage to ensure that the configuration requirements are sufficient to install the Cisco Configuration Engine. The example below shows that the minimum RAM requirement is not meet within Cisco Configuration Engine.
-
   =======  System Requirement Check :         =======
+
   System Requirement Check :
   check OS.......... ok
   check OS.......... ok
   check CPU.......... ok
   check CPU.......... ok
Line 28: Line 28:
The install and check install scripts will check if any of the Cisco Configuration Engine packages are already installed and displays the warning message as shown below:
The install and check install scripts will check if any of the Cisco Configuration Engine packages are already installed and displays the warning message as shown below:
-
====================================================================
 
-
Below lists  package(s) which should not exist before CE 3.5.3 install.
 
-
Please remove them before running CE 3.5.3 installation script.
 
-
====================================================================
 
-
...... package: SUNJava2-SDK, existing version: 1.6.0_05-0
 
-
...... package: mod_jk2, existing version: 2.0.4-4jpp_4rh
 
-
...... package: CSCOcnscfgs, existing version: 1.4-0
 
-
...... package: ACE, existing version: 5.6.0-0
 
-
...... package: CSCOadmincommon, existing version: 1.3-0
 
-
...... package: CSCOcnscommon, existing version: 1.4-0
 
-
...... package: CSCOcnses, existing version: 1.9-0
 
-
...... package: CSCOcnsnsm, existing version: 1.5-0
 
-
...... package: CSCOcnsimgs, existing version: 1.5-0
 
-
...... package: CSCOcnspki, existing version: 1.3-0
 
-
...... package: CSCOdat, existing version: 1.3-0
 
-
...... package: CSCOemail, existing version: 1.0-0
 
-
...... package: CSCOencryption, existing version: 1.4-1
 
-
...... package: CSCOGroupAdmin, existing version: 1.5-1
 
-
...... package: CSCOimgw, existing version: 1.4-0.0
 
-
...... package: CSCOImgwConfig, existing version: 1.4-0.0
 
-
...... package: CSCOImgwDeviceServer, existing version: 1.4-0.0
 
-
...... package: CSCOnsmAdmin, existing version: 1.0-0
 
-
...... package: CSCOsrvr, existing version: 1.5-0
 
-
...... package: CSCOTools, existing version: 1.2-0
 
-
...... package: CSCOudiAdmin, existing version: 1.0-0
 
-
...... package: xerces-c, existing version: 2.8-0
 
-
Uninstall the Cisco CE properly and then try to install or run the install check script.
 
-
Check for Dependent OS Packages
 
-
The Cisco CE install and check install script will check for the OS dependent packages and display error messages if the required packages are not installed.
 
-
Below lists package(s) which should be shared between CE and other projects. It is now detected that these component(s) are not installed or of different version from that required by CE 3.5.2. Please remove the inappropriate packages and install required packages before re-running CE 3.5.2 installation script.
 
-
...... package: httpd, existing version: not installed
 
-
...... expected version: 2.0.52
 
-
...... package: httpd-suexec, existing version: not installed
+
  Below lists  package(s) which should not exist before CE 3.5.3 install.
-
...... expected version: 2.0.52
+
  Please remove them before running CE 3.5.3 installation script.  
-
...... package: mod_ssl, existing version: not installed
+
  ...... package: SUNJava2-SDK, existing version: 1.6.0_05-0
-
...... expected version: 2.0.52
+
  ...... package: mod_jk2, existing version: 2.0.4-4jpp_4rh
 +
  ...... package: CSCOcnscfgs, existing version: 1.4-0
 +
  ...... package: ACE, existing version: 5.6.0-0
 +
  ...... package: CSCOadmincommon, existing version: 1.3-0
 +
  ...... package: CSCOcnscommon, existing version: 1.4-0
 +
  ...... package: CSCOcnses, existing version: 1.9-0
 +
  ...... package: CSCOcnsnsm, existing version: 1.5-0
 +
  ...... package: CSCOcnsimgs, existing version: 1.5-0
 +
  ...... package: CSCOcnspki, existing version: 1.3-0
 +
  ...... package: CSCOdat, existing version: 1.3-0
 +
  ...... package: CSCOemail, existing version: 1.0-0
 +
  ...... package: CSCOencryption, existing version: 1.4-1
 +
  ...... package: CSCOGroupAdmin, existing version: 1.5-1
 +
  ...... package: CSCOimgw, existing version: 1.4-0.0
 +
  ...... package: CSCOImgwConfig, existing version: 1.4-0.0
 +
  ...... package: CSCOImgwDeviceServer, existing version: 1.4-0.0
 +
  ...... package: CSCOnsmAdmin, existing version: 1.0-0
 +
  ...... package: CSCOsrvr, existing version: 1.5-0
 +
  ...... package: CSCOTools, existing version: 1.2-0
 +
  ...... package: CSCOudiAdmin, existing version: 1.0-0
 +
  ...... package: xerces-c, existing version: 2.8-0
-
Please install the 3 missing package mentioned above from your Operating System distribution mentioned below.
+
Uninstall the Cisco CE properly and then try to install or run the install check script.
-
Red Hat Enterprise Linux AS release 4 (Nahant Update 6)
+
-
Install the required software from the distribution supported by the customer.
+
-
Installation Checks Performed by CE Check Script
+
-
The check install script will check for the OS package being installed on the system.
+
-
Package 'httpd'is shared...  
+
-
/bin/rpm -V httpd
+
==Check for Dependent OS Packages==
-
S.5....T c /etc/rc.d/init.d/httpd
+
   
-
..?.....  /usr/sbin/suexec
+
The Cisco CE install and check install script will check for the OS dependent packages and display error messages if the required packages are not installed.  
-
system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0
+
-
 
+
-
Following command failed: see ./checkError.log for details
+
-
/bin/rpm -V httpd
+
-
 
+
-
Warning package httpd is not properly installed
+
-
Run the command '/bin/rpm -V httpd' to see the issues
+
-
Verify the error to see if the configurations are change and reinstall the packages accordingly.
+
-
Check for OS Dependent Package Files Missing
+
-
The check install script will check for  any missing files from the OS package that is installed on the system.
+
-
Package 'mod_ssl'is shared...
+
-
 
+
-
/bin/rpm -V mod_ssl
+
-
S.5....T c /etc/httpd/conf.d/ssl.conf
+
-
system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0
+
-
 
+
-
Following command failed: see ./checkError.log for details
+
-
/bin/rpm -V mod_ssl
+
-
 
+
-
Warning package mod_ssl is not properly installed
+
-
Run the command '/bin/rpm -V mod_ssl' to see the issues
+
-
Error file or directory /usr/lib/httpd/modules/mod_ssl.so doesn't exist
+
-
Please re-install the mod_ssl from your Operating System distribution mentioned below.
+
-
Red Hat Enterprise Linux Server release 5.2 (Tikanga)
+
-
Reinstall the package properly from the OS distribution.
+
-
 
+
-
 
+
-
 
+
-
 
+
-
Installation Checks
+
-
This section describes the installation checks performed by the ce_install.sh and ce_check.sh scripts.
+
-
If the user trying to install or run the check install script is not a root user, the following error message is displayed:
+
-
Reading XML file ./installRule.linux5.xml
+
-
check Root user..........
+
-
Error!!! Only user "root" can run check script!
+
-
The root user option should be used to install the CE.
+
-
The install and check install scripts validates the OS, CPU speed, RAM, and disk space usage to ensure that the configuration requirements are sufficient to install the Cisco Configuration Engine. The example below shows that the minimum RAM requirement is not meet within the Cisco Configuration Engine.
+
-
======= System Requirement Check :          =======
+
-
check OS.......... ok
+
-
check CPU.......... ok
+
-
check Ram.......... Error the machine has only 515536 Kbytes memory. Minimum requirement: 2000000 Kbytes.
+
-
check Disk Space '/var/tmp'.......... ok
+
-
Check the system requirements and provide the proper configuration to install the Cisco Configuration Engine.
+
-
The install and check install scripts will check if any of the Cisco Configuration Engine packages are already installed and displays the warning message as shown below:
+
-
====================================================================
+
-
Below lists package(s) which should not exist before CE 3.5.3 install. Please remove them before running CE 3.5.3 installation script.
+
-
====================================================================
+
-
...... package: SUNJava2-SDK, existing version: 1.6.0_05-0
+
-
...... package: mod_jk2, existing version: 2.0.4-4jpp_4rh
+
-
...... package: CSCOcnscfgs, existing version: 1.4-0
+
-
...... package: ACE, existing version: 5.6.0-0
+
-
...... package: CSCOadmincommon, existing version: 1.3-0
+
-
...... package: CSCOcnscommon, existing version: 1.4-0
+
-
...... package: CSCOcnses, existing version: 1.9-0
+
-
...... package: CSCOcnsnsm, existing version: 1.5-0
+
-
...... package: CSCOcnsimgs, existing version: 1.5-0
+
-
...... package: CSCOcnspki, existing version: 1.3-0
+
-
...... package: CSCOdat, existing version: 1.3-0
+
-
...... package: CSCOemail, existing version: 1.0-0
+
-
...... package: CSCOencryption, existing version: 1.4-1
+
-
...... package: CSCOGroupAdmin, existing version: 1.5-1
+
-
...... package: CSCOimgw, existing version: 1.4-0.0
+
-
...... package: CSCOImgwConfig, existing version: 1.4-0.0
+
-
...... package: CSCOImgwDeviceServer, existing version: 1.4-0.0
+
-
...... package: CSCOnsmAdmin, existing version: 1.0-0
+
-
...... package: CSCOsrvr, existing version: 1.5-0
+
-
...... package: CSCOTools, existing version: 1.2-0
+
-
...... package: CSCOudiAdmin, existing version: 1.0-0
+
-
...... package: xerces-c, existing version: 2.8-0
+
-
Uninstall the Cisco CE properly and then try to install or run the install check script.
+
-
The Cisco CE install and check install script swill check for the OS dependent packages and display error messages if the required packages are not installed.  
+
Below lists package(s) which should be shared between CE and other projects. It is now detected that these component(s) are not installed or of different version from that required by CE 3.5.2. Please remove the inappropriate packages and install required packages before re-running CE 3.5.2 installation script.  
Below lists package(s) which should be shared between CE and other projects. It is now detected that these component(s) are not installed or of different version from that required by CE 3.5.2. Please remove the inappropriate packages and install required packages before re-running CE 3.5.2 installation script.  
-
...... package: httpd, existing version: not installed
 
-
...... expected version: 2.0.52
 
-
...... package: httpd-suexec, existing version: not installed  
+
  ...... package: httpd, existing version: not installed
-
...... expected version: 2.0.52
+
  ...... expected version: 2.0.52
 +
  ...... package: httpd-suexec, existing version: not installed  
 +
  ...... expected version: 2.0.52
 +
  ...... package: mod_ssl, existing version: not installed
 +
  ...... expected version: 2.0.52
-
...... package: mod_ssl, existing version: not installed
+
Install the 3 missing package mentioned above from your Operating System distribution mentioned below.
-
...... expected version: 2.0.52
+
-
 
+
-
Please install the 3 missing package mentioned above from your Operating System distribution mentioned below.
+
Red Hat Enterprise Linux AS release 4 (Nahant Update 6)
Red Hat Enterprise Linux AS release 4 (Nahant Update 6)
Install the required software from the distribution supported by the customer.
Install the required software from the distribution supported by the customer.
 +
Installation Checks Performed by CE Check Script
The check install script will check for the OS package being installed on the system.  
The check install script will check for the OS package being installed on the system.  
-
Package 'httpd'is shared...
 
-
/bin/rpm -V httpd
+
  Package 'httpd'is shared...
-
S.5....T c /etc/rc.d/init.d/httpd
+
  /bin/rpm -V httpd
-
..?.....  /usr/sbin/suexec
+
  S.5....T c /etc/rc.d/init.d/httpd
-
system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0  
+
  ..?.....  /usr/sbin/suexec
 +
  system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0  
 +
  Following command failed: see ./checkError.log for details
 +
  /bin/rpm -V httpd
 +
  Warning package httpd is not properly installed
 +
  Run the command '/bin/rpm -V httpd' to see the issues
-
Following command failed: see ./checkError.log for details
 
-
/bin/rpm -V httpd
 
-
 
-
Warning package httpd is not properly installed
 
-
Run the command '/bin/rpm -V httpd' to see the issues
 
Verify the error to see if the configurations are change and reinstall the packages accordingly.
Verify the error to see if the configurations are change and reinstall the packages accordingly.
-
The check install script will check for any missing files from the OS package that is installed on the system.
 
-
Package 'mod_ssl'is shared...
 
-
/bin/rpm -V mod_ssl
+
==Check for OS Dependent Package Files Missing==
-
S.5....T c /etc/httpd/conf.d/ssl.conf
+
-
system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0
+
-
Following command failed: see ./checkError.log for details
+
The check install script will check for  any missing files from the OS package that is installed on the system.
-
/bin/rpm -V mod_ssl
+
-
Warning package mod_ssl is not properly installed
+
  Package 'mod_ssl'is shared...
-
Run the command '/bin/rpm -V mod_ssl' to see the issues
+
  /bin/rpm -V mod_ssl
-
Error file or directory /usr/lib/httpd/modules/mod_ssl.so doesn't exist
+
  S.5....T c /etc/httpd/conf.d/ssl.conf
-
Please re-install the mod_ssl from your Operating System distribution mentioned below.
+
  system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0
-
Red Hat Enterprise Linux Server release 5.2 (Tikanga)
+
  Following command failed: see ./checkError.log for details
-
Reinstall the package properly from the OS distribution.
+
  /bin/rpm -V mod_ssl
 +
  Warning package mod_ssl is not properly installed
 +
  Run the command '/bin/rpm -V mod_ssl' to see the issues
 +
  Error file or directory /usr/lib/httpd/modules/mod_ssl.so doesn't exist
 +
  Please re-install the mod_ssl from your Operating System distribution mentioned below.
 +
  Red Hat Enterprise Linux Server release 5.2 (Tikanga)
 +
  Reinstall the package properly from the OS distribution.

Revision as of 09:09, 29 April 2011

Contents

Troubleshooting Installation Checks

This section describes the installation checks performed by ce_install.sh and ce_check.sh scripts. To troubleshoot by using the installation checks script, see the following sections:

Root User Check

If the user trying to install or run the check install script is not a root user, the following error message is displayed:

 Reading XML file ./installRule.linux5.xml 
 check Root user.......... 
 Error!!! Only user "root" can run check script! 
 The root user option should be used to install the Cisco CE.
 Check for OS, CPU, RAM, and Disk space

The install and check install script validates the OS, CPU speed, RAM, and disk space usage to ensure that the configuration requirements are sufficient to install the Cisco Configuration Engine. The example below shows that the minimum RAM requirement is not meet within Cisco Configuration Engine.

  System Requirement Check :
  check OS.......... ok
  check CPU.......... ok
  check Ram.......... Error the machine has only 515536 Kbytes memory.
  Minimum requirement: 2000000 Kbytes.
  check Disk Space '/var/tmp'.......... ok 
  Check the system requirements and provide the proper 
  configuration to install the    Cisco Configuration Engine.

Checks for dependent and CE Packages

The install and check install scripts will check if any of the Cisco Configuration Engine packages are already installed and displays the warning message as shown below:


  Below lists  package(s) which should not exist before CE 3.5.3 install.
  Please remove them before running CE 3.5.3 installation script. 
  ...... package: SUNJava2-SDK, existing version: 1.6.0_05-0 
  ...... package: mod_jk2, existing version: 2.0.4-4jpp_4rh 
  ...... package: CSCOcnscfgs, existing version: 1.4-0 
  ...... package: ACE, existing version: 5.6.0-0 
  ...... package: CSCOadmincommon, existing version: 1.3-0 
  ...... package: CSCOcnscommon, existing version: 1.4-0 
  ...... package: CSCOcnses, existing version: 1.9-0 
  ...... package: CSCOcnsnsm, existing version: 1.5-0 
  ...... package: CSCOcnsimgs, existing version: 1.5-0 
  ...... package: CSCOcnspki, existing version: 1.3-0 
  ...... package: CSCOdat, existing version: 1.3-0 
  ...... package: CSCOemail, existing version: 1.0-0 
  ...... package: CSCOencryption, existing version: 1.4-1 
  ...... package: CSCOGroupAdmin, existing version: 1.5-1 
  ...... package: CSCOimgw, existing version: 1.4-0.0 
  ...... package: CSCOImgwConfig, existing version: 1.4-0.0 
  ...... package: CSCOImgwDeviceServer, existing version: 1.4-0.0 
  ...... package: CSCOnsmAdmin, existing version: 1.0-0 
  ...... package: CSCOsrvr, existing version: 1.5-0 
  ...... package: CSCOTools, existing version: 1.2-0 
  ...... package: CSCOudiAdmin, existing version: 1.0-0 
  ...... package: xerces-c, existing version: 2.8-0

Uninstall the Cisco CE properly and then try to install or run the install check script.

Check for Dependent OS Packages

The Cisco CE install and check install script will check for the OS dependent packages and display error messages if the required packages are not installed. Below lists package(s) which should be shared between CE and other projects. It is now detected that these component(s) are not installed or of different version from that required by CE 3.5.2. Please remove the inappropriate packages and install required packages before re-running CE 3.5.2 installation script.

  ...... package: httpd, existing version: not installed 
  ...... expected version: 2.0.52
  ...... package: httpd-suexec, existing version: not installed 
  ...... expected version: 2.0.52
  ...... package: mod_ssl, existing version: not installed 
  ...... expected version: 2.0.52

Install the 3 missing package mentioned above from your Operating System distribution mentioned below. Red Hat Enterprise Linux AS release 4 (Nahant Update 6) Install the required software from the distribution supported by the customer. Installation Checks Performed by CE Check Script The check install script will check for the OS package being installed on the system.

 Package 'httpd'is shared... 
 /bin/rpm -V httpd
 S.5....T c /etc/rc.d/init.d/httpd
 ..?.....   /usr/sbin/suexec
 system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0 
 Following command failed: see ./checkError.log for details
 /bin/rpm -V httpd
 Warning package httpd is not properly installed
 Run the command '/bin/rpm -V httpd' to see the issues

Verify the error to see if the configurations are change and reinstall the packages accordingly.

Check for OS Dependent Package Files Missing

The check install script will check for any missing files from the OS package that is installed on the system.

 Package 'mod_ssl'is shared... 
 /bin/rpm -V mod_ssl
 S.5....T c /etc/httpd/conf.d/ssl.conf
 system failed: 256 exit_value  = 1 signal_num  = 0 dumped_core = 0 
 Following command failed: see ./checkError.log for details
 /bin/rpm -V mod_ssl
 Warning package mod_ssl is not properly installed
 Run the command '/bin/rpm -V mod_ssl' to see the issues
 Error file or directory /usr/lib/httpd/modules/mod_ssl.so doesn't exist
 Please re-install the mod_ssl from your Operating System distribution mentioned below.
 Red Hat Enterprise Linux Server release 5.2 (Tikanga)
 Reinstall the package properly from the OS distribution.

Rating: 0.0/5 (0 votes cast)

Personal tools