Cisco Automated Administrator (AAS) for Symposium: AAS - Installation and Configuration - AAS does not start

From DocWiki

Revision as of 23:53, 12 March 2010 by Cchetty (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

AAS - Installation and Configuration - AAS does not start

Problem Summary AAS does not start
Error Message None
Possible Cause Check the logs for specific diagnostics.

The possible causes are:

  • AAS software was installed while PG was still running. As a result, the PG does not know that it has to start AAS.
  • AAS installation did not complete successfully.
  • Invalid IP address/hostname specified for AAS Side A when AAS Side B has a value.
Recommended Action Perform these actions:


  • Stop and restart the PG.
  • Find out why the install failed, fix it, and reinstall the AAS software.
  • Reinstall the AAS software. Specify the correct IP address/hostname for AAS Side A.


Release Release 7.5(1) and 8.0
Associated CDETS # None.

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/Cisco_Automated_Administrator_(AAS)_for_Symposium:_AAS_-_Installation_and_Configuration_-_AAS_does_not_start"
Personal tools