Cisco Automated Administrator (AAS) for Symposium: AAS - Fails to connect to SEI server

• Incorrect IP and/or port specified for SEI CORBA naming service.
• Incorrect user name and/or password specified for SEI.
• Incorrect or missing SCCS site name.

The agents and persons removed from ICM during the AAS installation were not deleted permanently.

Additional recommended actions are:

• Specify the site name in the SCCS host file.
• Specify the port to connect to SEI in the sei.properties file in the server machine. This file can be found at Nortel\TAO14\properties\sei.ini
• If the AAS is not connecting to the Symposium, the port and the host for Symposium can be set by changing the value for the following registry.

  Registry: HKLM - SOFTWARE - Cisco Systems, Inc.\ICM\<icminstance>\PGxx\PG\CurrentVersion\AASS\aas1\AASData\Config\JavaRuntimeOptions

  Current Value = Blank

  New Value = -Dcom.sun.CORBA.POA.ORBPersistentServerPort=59012 -Dcom.sun.CORBA.ORBServerHost=170.14.5.50Replace 59012 with the client port and 170.14.5.50 to the IP of the AAS.

• Do not use the local IP address (127.0.0.1) as an AAS IP address.
• Ping the IP address/host of the Symposium server.
• Telnet to the IP address/host and Symposium port to see if you can connect.