Cisco Automated Administrator (AAS) for Symposium: AAS - Both AAS servers become master
Revision as of 23:53, 12 March 2010 by Cchetty
AAS - Both AAS servers become master
|Problem Summary||Both AAS servers become master.|
|Possible Cause||One of the AAS IP addresses specified during the installation of AAS is 127.0.0.1 (loopback).|
|Recommended Action||Do not use the loopback IP address. It confuses the Master Selection algorithm causing both AAS servers in a duplexed environment to become master. Use the actual IP address of the computer.
Note: Do not use the local IP address (127.0.0.1) as an AAS IP address.
|Release||Release 7.5(1) and 8.0|
|Associated CDETS #||None.|