Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Compression

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (New page: Troubleshooting Compression You can configure compression by entering the compress command under a Layer 7 policy. For example: class-map type http loadbalance matc...)
m
Line 1: Line 1:
 +
This article describes the process and CLI commands for troubleshooting SSL in the ACE.
 +
 +
{| align="right" border="1" cellspacing = "0"
 +
|align="center"|'''Guide Contents'''
 +
|-
 +
|[[Cisco Application Control Engine (ACE) Troubleshooting Guide|Main Article]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Overview of ACE Troubleshooting|Overview of ACE Troubleshooting]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Understanding the ACE Module Architecture and Traffic Flow|Understanding the ACE Module Architecture and Traffic Flow]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Preliminary ACE Troubleshooting|Preliminary ACE Troubleshooting]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting ACE Boot Issues|Troubleshooting ACE Boot Issues]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting with ACE Logging|Troubleshooting with ACE Logging]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Connectivity|Troubleshooting Connectivity]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Ethernet Ports|Troubleshooting ACE Appliance Ethernet Ports]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Remote Access|Troubleshooting Remote Access]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Access Control Lists|Troubleshooting Access Control Lists]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Network Address Translation|Troubleshooting Network Address Translation]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting ACE Health Monitoring|Troubleshooting ACE Health Monitoring]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Layer 4 Load Balancing|Troubleshooting Layer 4 Load Balancing]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Layer 7 Load Balancing|Troubleshooting Layer 7 Load Balancing]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Redundancy|Troubleshooting Redundancy]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting SSL|Troubleshooting SSL]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Performance Issues|Troubleshooting Performance Issues]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- ACE Resource Limits|ACE Resource Limits]]<br>[[Cisco Application Control Engine (ACE) Troubleshooting Guide -- Managing Resources|Managing ACE Resources]]<br>
 +
|}
 +
 +
__TOC__
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +

Revision as of 16:45, 11 March 2011

This article describes the process and CLI commands for troubleshooting SSL in the ACE.

Guide Contents
Main Article
Overview of ACE Troubleshooting
Understanding the ACE Module Architecture and Traffic Flow
Preliminary ACE Troubleshooting
Troubleshooting ACE Boot Issues
Troubleshooting with ACE Logging
Troubleshooting Connectivity
Troubleshooting ACE Appliance Ethernet Ports
Troubleshooting Remote Access
Troubleshooting Access Control Lists
Troubleshooting Network Address Translation
Troubleshooting ACE Health Monitoring
Troubleshooting Layer 4 Load Balancing
Troubleshooting Layer 7 Load Balancing
Troubleshooting Redundancy
Troubleshooting SSL
Troubleshooting Performance Issues
ACE Resource Limits
Managing ACE Resources





















Troubleshooting Compression

You can configure compression by entering the compress command under a Layer 7 policy. For example:

class-map type http loadbalance match-any L7default-compression- exclusion-mime-type_CLASS

 description Classmap for default SLB compression exclusion mime-types.
 2 match http url .*gif
 3 match http url .*css
 4 match http url .*js

policy-map type loadbalance first-match L7_COMP-TEST_SLB_POLICY

 class L7default-compression-exclusion-mime-type_CLASS
   serverfarm SFARM1
 class class-default
   serverfarm SFARM1
   compress default-method deflate  <<<<<<<<<<<<<<<<<<<<<

For compression to work, a client must send a request with an ACCEPT-ENCODING method of gzip or deflate. If a client sends both methods, then the ACE uses the configured method. The ACE rewrites the ACCEPT-ENCODING header to IDENTITY to indicate to the server that it should not compress the return data. By default, the ACE does not compress responses that are less than 512 bytes. You can change this minimum size threshold by using an HTTP parameter-map as follows:

parameter-map type http http compress minimum-size 100

The ACE does not compress the server response if the response contains HTTP/1.0, HTTP responses other than 200 OK and 100 Continue, and the following:

- cache-control: not transform - content-MD5

You can configure various others parameters using an HTTP parameter map (for example, mimetype and user-Agent).

switch/Admin# show service-policy MP detail

Status  : ACTIVE Description: ----------------------------------------- Interface: vlan 1 108

 service-policy: mp
   class: vip
    VIP Address:    Protocol:  Port:
    2.0.5.1         tcp        eq    80
     loadbalance:
       L7 loadbalance policy: pm
       VIP ICMP Reply       : ENABLED
       VIP state: OUTOFSERVICE
       Persistence Rebalance: ENABLED
       curr conns       : 0         , hit count        : 0
       dropped conns    : 0
       client pkt count : 0         , client byte count: 0
       server pkt count : 0         , server byte count: 0
       conn-rate-limit      : 0         , drop-count : 0
       bandwidth-rate-limit : 0         , drop-count : 0
       L7 Loadbalance policy : pm
         class/match : h
           ssl-proxy client : c
           LB action :
              primary serverfarm: sf1
                   state: DOWN
               backup serverfarm : -
           hit count        : 0
           dropped conns    : 0
           compression      : on  <<< compression if on
     compression:
       bytes_in  : 0                          bytes_out : 0  <<< number of bytes transmitted  after compressing
       Compression ratio : 0.00%  << ratio of data compressed.
               Gzip: 0               Deflate: 0  <<< Number of times the Method is used
     compression errors:
       User-Agent  : 0               Accept-Encoding    : 0         | -- <<< Check these counters to see if they are increasing
       Content size: 0               Content type       : 0             |
       Not HTTP 1.1: 0               HTTP response error: 0    |
       Others      : 0
       Parameter-map(s):
         h

switch/Admin#

Rating: 0.0/5 (0 votes cast)

Personal tools