Cannot login to CLI
From DocWiki
(Difference between revisions)
(New page: == Cannot login to CLI == {| border="1" |- ! '''Problem Summary''' | Cannot login to CLI |- ! '''Error Message''' | NA |- ! '''Possible Cause''' | The username or the password used for lo...) |
m (1 revision) |
Latest revision as of 15:20, 9 April 2010
Cannot login to CLI
| Problem Summary | Cannot login to CLI |
|---|---|
| Error Message | NA |
| Possible Cause | The username or the password used for login is not correct. |
| Recommended Action | Cross check that you are using the username which was specified as the OS Administrator at install time. Also cross check if you are using the correct password. If you have forgotten the password refer to the section "Resetting Administrator and Security Passwords" in "Cisco Unified Communications Operating System Administration Guide" from http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html |
| Release | Release 8.0(1) |
| Associated CDETS # |
