Call Flow Details for CUBE using Unified CM Phone
From DocWiki
Back to: Deployment Scenarios for Cisco MediaSense
Back to: Category:Cisco MediaSense
This page contains the detailed results of a number of carefully defined call flows. The results include:
- The metadata collected by MediaSense, presented in JSON format
- The list of session events published by MediaSense
The tests documented in this page use the following Cisco MediaSense configuration:
- All phones are registered to a Unified CM.
- Incoming call is directed by Unified CM through a SIP Trunk to Cisco Unified Border Element (CUBE). CUBE loops the call back to Unified CM.
- Unified CM is configured such that calls prefixed with 777 are routed via a SIP trunk through CUBE. CUBE loops these calls back to Unified CM as well.
- Three phones are required for Transfer/Conference scenarios. Two phones are required for the Hold/Resume scenarios.
Call Flows and Resulting Data
| No. | Call Flow | Details | CCID | Data | Events | Notes |
|---|---|---|---|---|---|---|
| I. | BlindTransfer | 1053 dials 7771054 and connects to 1054. 1054 transfers to 1055 by dialing 1055 and hangs up during ringing. 1055 answers, then later drops. |
3481130112-0000065536- |
| | |
| II | Consult Transfer - Dial 1055 to transfer | 1053 dials 7771054 and connects to 1054. 1054 transfers to 1055 by dialing 1055 and completes transfer. 1055 answers, then later drops. |
2460948736-0000065536- |
| | |
| III | Consult Transfer - Dial 1055 to transfer Caller drops | 1053 dials 7771054 and connects to 1054. 1054 transfers to 1055 by dialing 1055 and completes transfer. 1053 drops. | 1245850624-0000065536- 0000000335-0745980426 |
| | |
| IV | Consult Transfer - Dial 7771055 to transfer | 1053 dials 7771054 and connects to 1054. 1054 transfers to 1055 by dialing 7771055 and completes transfer. 1055 answers, then later drops. |
| Session 1:
Session 2:
| | |
| V | Consult Transfer - Dial 7771055 to transfer- Caller performs transfer | 1053 dials 7771054 and connects to 1054. 1053 transfers to 1055 by dialing 7771055 and completes transfer. 1054 drops. |
| Session 1:
Session 2:
| | |
| VI. | Conference - Dial 1055 to conference, third-party drops | 1053 dials 7771054 and connects to 1054. 1054 conferences 1055 by dialing 1055 and completes conference with 1053 and 1055. 1055 answers, then later drops. | 2846127104-0000065536- 0000000452-0745980426 |
| Neither Track0 nor Track1 had actual media packets totaling the entire track duration. | |
| VII | Conference - Dial 1055 to conference, Caller drops | 1057 dials 7771058 and connects to 1058. 1058 conferences 1059 by dialing 1059 and completes conference with 1057 and 1059. 1057 drops. | 2661163520-0000065536- 0000000476-0745980426 |
|
| |
| VIII | Conference - Dial 1055 to conference, Caller performs conference | 1057 dials 7771058 and connects to 1058. 1057 conferences 1059 by dialing 1059 and completes conference with 1058 and 1059. 1059 drops. | 0131359744-0000065536- 0000000001-0745980426 |
| Track1: Does not record any packets during conference setup so actual played duration is much less than track duration. | |
| IX | Conference - Dial 7771055 to conference, caller drops | 1057 dials 7771058 and connects to 1058. 1058 conferences 1059 by dialing 7771059 and completes conference with 1057 and 1059. 1057 drops. |
|
Session1:
Session 2:
| Session1, Track0 did not play back the silence during the period of conference setup. So the media stream is only half as long as the track duration. | |
| X | Conference - Dial 7771059 to conference, caller performs conference | 1057 dials 7771058 and connects to 1058. 1057 conferences 1059 by dialing 7771059 and completes conference with 1057 and 1059. 1057 drops. |
|
Session1:
Session2:
|
| |
| XI | Hold/Resume - Caller performs hold/resume | 1057 dials 7771058 and connects to 1058. 1057 puts the call on hold for some time then resumes. 1057 drops. | 1173310848-0000065536- 0000000001-0745980426 |
| Although the duration for track 1 is the same as the entire session duration, it does not contain media packets for the period during the hold. | |
| XII | Hold/Resume - Called party performs hold/resume | 1057 dials 7771058 and connects to 1058. 1058 puts the call on hold for some time then resumes. 1058 drops. | 1667951104-0000065536- 0000000013-0745980426 |
| Although the duration for track 0 is the same as the entire session duration, it does not contain media packets for the period during the hold. |