Application Extension Platform 1.x -- Example Configuration for Cisco 280x ISR and Cisco AXP Service Module
From DocWiki
(Difference between revisions)
(New page: === Example: Configuration for Cisco AXP ISR with Cisco AXP Service Module=== The '''show running-config''' command is entered in Cisco ISR privileged EXEC mode on the router. <pre> 2800_...) |
m (1 revision) |
Latest revision as of 20:30, 2 December 2010
Example: Configuration for Cisco AXP ISR with Cisco AXP Service Module
The show running-config command is entered in Cisco ISR privileged EXEC mode on the router.
2800_w_axp# show running-config interface GigabitEthernet0/0 ip address 10.7.0.90 255.255.255.0 shutdown duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 172.16.10.1 255.255.255.0 duplex auto speed auto media-type rj45 ! interface Integrated-Service-Engine4/0 ip unnumbered GigabitEthernet0/1 service-module ip address 172.16.10.2 255.255.255.0 !Application: Online on NME service-module ip default-gateway 172.16.10.190 no keepalive !
Cisco AXP Service Module Running Configuration: Example
The show running-config command is entered in Cisco AXP EXEC mode on the service module.
se-Module> show running-config Generating configuration: clock timezone America/New_York hostname se-Module ip domain-name (none) ntp server 192.168.2.1 prefer system language preferred "en_US" software download server url "ftp://127.0.0.1/ftp" credentials hidden "6u/dKTN/hsEuSAEfw40XlF2eFHnZfyUTSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP" log trace local enable no service password-encryption interface eth0 ip address 192.168.2.2 255.255.255.0 exit interface eth1 exit ip ssh server app-service tcptrace bind interface eth0 hostname se-Module exit end se-Module>
Return to start of Getting Started Guide: Cisco AXP Getting Started Guide
