ASA Configuration Troubleshooting

From DocWiki

Revision as of 04:38, 3 May 2011 by Nkanagar (Talk | contribs)
Jump to: navigation, search

How to enable auto-update server logging on ASA device.

Execute the following commands.

ASA-Device(config)# logging enable

ASA-Device(config)# logging console 6

ASA-Device# debug auto-update server

ASA-Device# debug auto-update client


Configuration not pushed due to java.lang.SecurityException: Device Authentication Failed.

Check the following.

1. Check whether the ASA device is created on CE server.

2. if the device is created on CE side, then check the auto-update server cli on ASA to verify that the CLI is having correct username and password.

3. If you feel that the password is incorrect on either side, then re-sync the password on both the side by reconfiguring the auto-update server CLI on ASA device and by editing the device on CE side.

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/ASA_Configuration_Troubleshooting"
Personal tools