ASA Configuration Troubleshooting

From DocWiki

Revision as of 09:52, 29 April 2011 by Nkanagar (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Failed to Create the Device on Remote Database

Problem: You get the following error message:

 Failed to create the Device. Could not create Object: DN=
 [cn=jctest, ou=CISDevices,ou=CISObjects,ou=configengine,o=cisco
 [LDAP: error code 50 - no write access to parent]

Solution: To resolve this problem, follow these steps:

1. On the remote directory server machine, stop the OpenLDAP server by entering the following commands:

 *In Solaris, enter: /etc/init.d/NetAppOpenLDAP stop
 *In Linux, enter: /etc/rc.d/init.d//NetAppOpenLDAP stop

2. Open the $CISCO_CE_INSTALL_ROOT/openldap/etc/openldap/slapd.conf file. Then add the following:

  # open write permission to support external directory 
    access to *
          by * write
          by * read
          by anonymous auth

3. To start the OpenLDAP server, enter the following commands:

  * In Solaris, enter: /etc/init.d/NetAppOpenLDAP start
  * In Linux, enter: /etc/rc.d/init.d//NetAppOpenLDAP start

Rating: 0.0/5 (0 votes cast)

Personal tools