ACS 4.x How to make user fall directy to enable mode configuration example

From DocWiki

Revision as of 14:56, 23 June 2010 by Jkratky (Talk | contribs)
Jump to: navigation, search

Introduction

How to make user login straight to enable mode on IOS device


IOS Configuration

Router(config)# username [username] password [password]

tacacs-server host [ip]

tacacs-server key [key]

aaa new-model

aaa authentication login default group tacacs+ local

aaa authorization exec default group tacacs+ if-authenticated

ACS cofiguration

Bring users/groups in at level 15

1. Go to user or group setup in ACS

2. Drop down to "TACACS+ Settings"

3. Place a check in "Shell (Exec)"

4. Place a check in "Privilege level" and enter "15" in the adjacent field


Now login to IOS device, you will fall straight to enable mode

Rating: 4.4/5 (7 votes cast)

Personal tools